Lateral Position Effect of Auxiliary Permanent Magnets on the Magnetic Force Properties of Cylindrical YBCO
Özet
The magnetic levitation force (MLF) and the guidance force (GF) should be improved for loading capacity and stability of Maglev systems, respectively. Although there are some ways to increase these properties, using of auxiliary onboard permanent magnets (PMs) can be considered as the most efficient one. The auxiliary PMs increase the MLF significantly but, at the same time, decrease the GF. We have searched a solution to overcome this problem in this study. Firstly, we have determined the optimum vertical positions of the auxiliary PMs and then we have investigated the vertical levitation force and lateral guidance force of hybrid Maglev system depending on lateral position of auxiliary PMs in different cooling heights (CHs). A cylindrical YBCO superconductor, fabricated by a top seeding method with the diameter of 45 mm and the height of 15 mm, was used as a high-temperature superconductor (HTS). The maximum increment rate in MLF and the minimum decrement rate in GF were observed as 277 and 54 %, respectively. The increment in MLF was obtained five times more than the decrement in GF, and this reality points out that the results of this study can be useful for improving the loading capacity and thus enhancing the practical applicability of Maglev systems. © 2016, Springer Science+Business Media New York.
Kaynak
Journal of Superconductivity and Novel MagnetismCilt
30Sayı
10Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Effect of onboard PM position on the magnetic force and stiffness performance of multi-seeded YBCO
Ozturk K.; Kabaer M.; Abdioglu M. (Elsevier Ltd, 2015)Abstract In implemented studies before, although some advancements have been achieved in improving on the levitation or guidance force efficiency of YBCOs separately, both of these forces could not been enhanced simultaneously. ... -
Clarification of magnetic levitation force and stability property of multi-seeded YBCO in point of supercurrent coupling effect
Ozturk K.; Kabaer M.; Abdioglu M.; Patel A.; Cansiz A. (Elsevier Ltd, 2016)In our study as different from the literature, which are mostly related to superconductor fabrication, application and optimization, especially physical origins of bulk supercurrent generation, magnetic levitation and ... -
Levitation and guidance force efficiencies of bulk YBCO for different permanent magnetic guideways
Abdioglu M.; Ozturk K.; Gedikli H.; Ekici M.; Cansiz A. (Elsevier Ltd, 2015)The development of superconductor Maglev systems depends on various disciplinary studies due to the inherent composition of available technologies. Because the fabrication cost is very effective on the Maglev, the requirement ...