Effect of copper addition to aluminium alloys on surface roughness in terms of turning operation
Özet
Aluminium alloys have found usage in numerous industries due to some superior properties, such as high strength-to-weight ratios and high oxidation resistance. Aluminum alloys can be strengthened by some techniques. One of them, the most practical one, is precipitation hardening in aluminum alloys. By adding Cu, aluminum gains strength and hardness. In this work the machinability of unalloyed aluminum and aluminum alloyed with 4% and 8% of Cu have been investigated. Machinability assessment was executed in terms of surface roughness during turning operation. Specimens were manufactured by sand casting method, which is a commonly utilized casting operation. In machinability experiments, three different cutting tool materials were employed. Three different cutting speeds and three different feed rates have been used. Effect of these feeds, speeds and cutting tool materials on surface roughness has been studied. In addition, effect of Cu addition to aluminum alloys on surface roughness has been examined. © 2017, Polish Academy of Sciences. All rights reserved.
Kaynak
Acta Physica Polonica ACilt
131Sayı
3Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging
Purcek G.; Yanar H.; Demirtas M.; Alemdag Y.; Shangina D.V.; Dobatkin S.V. (Elsevier Ltd, 2016)Properties of Cu-Cr-Zr alloy with ultrafine-grained (UFG) structure produced by equal-channel angular pressing (ECAP) via different routes have been investigated. Special attention was paid to the optimization of ... -
Leaded brass alloys for gamma-ray shielding applications
Şakar E.; Büyükyıldız M.; Alım B.; Şakar B.C.; Kurudirek M. (Elsevier Ltd, 2019)The leaded brasses show high machinability and atmospheric corrosion resistance. Hence, they are being used in different applications such as machine parts, valves, fittings etc. Besides, they can serve as radiation shields ... -
Melt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu
Çolak M.; Kayikci R.; Dispinar D. (Springer Boston, 2016)The treatment of liquid aluminum prior to casting typically consists of purging gas and/or fluxes through the melt. By the use of several chemicals during these operations, several environmental problems can occur. Therefore, ...