Cetin M.E.Demirtas M.Sofuoglu H.Cora Ö.N.Purcek G.20.04.20192019-04-2020.04.20192019-04-2020160921-5093https://dx.doi.org/10.1016/j.msea.2016.06.072https://hdl.handle.net/20.500.12403/596Effects of grain size on room temperature (RT) deformation behavior of superplastic Zn–22Al alloy under uniaxial and biaxial loading conditions were investigated. Two–step equal channel angular pressing (ECAP) and subsequent annealing processes were applied to the alloy in order to obtain microstructures with various grain sizes ranging from submicron to micron sizes. Grain size of 200 nm was achieved after ECAP of the alloy, and it was increased up to ~2.60 µm by annealing at 250 °C for different time periods. Changes in deformation behaviors of the alloy with various grain sizes were found to be in good agreement under the uniaxial tensile and biaxial Erichsen test conditions. Increasing grain size decreased both the maximum elongation under uniaxial deformation and limiting dome height (LDH) under biaxial deformation. The high elongation to failure and LDH values for the samples with submicron grain size were attributed to their high strain rate sensitivity. © 2016 Elsevier B.V.enginfo:eu-repo/semantics/closedAccessFormabilitySevere plastic deformationSuperplastic Zn–22Al alloyUltrafine grained structureFormabilityGrain size and shapePressing (forming)Strain rateZincAnnealing processBiaxial deformationsDeformation behaviorSevere plastic deformationsTemperature deformationUltrafine grained structureUniaxial and biaxial loadingsUniaxial deformationEqual channel angular pressingFormabilitySevere plastic deformationSuperplastic Zn–22Al alloyUltrafine grained structureFormabilityGrain size and shapePressing (forming)Strain rateZincAnnealing processBiaxial deformationsDeformation behaviorSevere plastic deformationsTemperature deformationUltrafine grained structureUniaxial and biaxial loadingsUniaxial deformationEqual channel angular pressingarticle6727887