Başlık için WoS İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 372, listelenen: 125-144
-
Effect of XRD relative intensities of the Li (002) on surface, optical and electrochemical impedance spectroscopy analyses of the deposited LiCoO2 thin film
(Springer New York LLC, 2017)In this paper, the effect of RF power on LiCoO2 thin films was investigated using X-ray diffractometer (XRD), atomic force microscopy, UV–Vis spectrophotometer, and potentiostat. The microstructural, surface, optical and ... -
The Effects of Cephalaria Syriaca Flour on the Quality of Sunn Pest (Eurygaster Integriceps)-Damaged Wheat
(Blackwell Publishing Ltd, 2016)The effects of Cephalaria syriaca flour on the quality of sunn pest-damaged wheat were investigated. Sunn pest-damaged wheat was blended into sound wheat at different levels (5, 10 and 15%). C. syriaca flour was then added ... -
Effects of choral, repeated and assisted reading strategies on reading and reading comprehension skills of poor readers
(Turkish Education Association, 2018)The main objective of this study was to explain the effects of choral, repeated and assisted reading strategies on fluent reading and reading comprehension skills of poor readers. The research was conducted with the ... -
Effects of grain size on room temperature deformation behavior of Zn–22Al alloy under uniaxial and biaxial loading conditions
(Elsevier Ltd, 2016)Effects of grain size on room temperature (RT) deformation behavior of superplastic Zn–22Al alloy under uniaxial and biaxial loading conditions were investigated. Two–step equal channel angular pressing (ECAP) and subsequent ... -
The effects of heat treatment on the synthesis of nickel ferrite (NiFe2O4) nanoparticles using the microwave assisted combustion method
(Elsevier, 2015)NiFe2O4nanoparticles were synthesized using the microwave assisted combustion method based on metal nitrate salts and urea. To remain of organic matters and to stabilize the particles, samples were thermally treated at ... -
Effects of in situ exopolysaccharide production and fermentation conditions on physicochemical, microbiological, textural and microstructural properties of Turkish-type fermented sausage (sucuk)
(Elsevier Ltd, 2016)In this work, the role of in situ exopolysaccharide (EPS) production under different fermentation conditions on physicochemical, microbiological, textural and microstructural properties of sucuk was determined. For this ... -
Effects of initial cooling conditions and measurement heights on the levitation performance of bulk MgB2 superconductor at different measurement temperatures
(Springer New York LLC, 2014)The levitation properties of MgB2 prepared by hot press at 200 ° C and then pellet/closed tube method has been investigated. The vertical and lateral levitation forces (Fz and Fx) on a cylindrical NdFeB permanent magnet ... -
Effects of milk somatic cell counts on some physicochemical and functional characteristics of skim and whole milk powders
(Elsevier Inc., 2016)The aim of this work was to study the influence of milk somatic cell count (SCC) levels on spray-dried milk powders. For this reason, 3 cow milks with different SCC (<300,000, 300,000-700,000, >700,000 SCC/mL) were ... -
Effects of origanum syriacum essential oil on blood parameters of broilers reared at high ambient heat
(Fundacao APINCO de Ciencia e Tecnologia Avicolas, 2017)The biochemical and hematological blood values of broilers fed under heat stress and that were administered Origanum syriacum (OS) essential oil were investigated in this study. In total, 400 male broilers (Ross-308; age, ... -
Effects of Root Plant Growth Promoting Rhizobacteria Inoculations on the Growth and Nutrient Content of Grapevine
(Taylor and Francis Inc., 2018)The objective of this study was to evaluate the effects of seven nitrogen (N2)-fixing and/or phosphorus (P)-solubilizing and siderophore-producing microorganism based bio-fertilizers in single and triple strain combinations ... -
The effects of silica fume and fly ash on the scaling resistance and flexural strength of pavement concretes
(2011)The purpose of this study is to investigate the effects of Silica Fume (SF) and Fly Ash (FA) additives on the frost salt scaling resistance and flexural strength properties of pavement concrete. An attempt is also made to ... -
The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO2 nanoparticles addition in diesel/biodiesel/n-butanol blends
(Elsevier Ltd, 2018)In this study, waste cooking oil biodiesel was mixed with titanium dioxide (TiO2), a metal-based nano particle, and n-butanol (C4H9OH) along with euro diesel to examine their effects on diesel engines. Various ratio of ... -
Efficiency improvement of gas turbine cogeneration systems [Poboljšanje u?inkovitosti kogeneracijskih sustava plinske turbine]
(Strojarski Facultet, 2017)In this study eight methods are evaluated for a gas turbine cogeneration cycle to improve the efficiency. These methods are increasing gas turbine inlet air temperature, cooling the inlet air of the compressor, air preheating, ... -
Electrorheological Fluids Equations Involving Variable Exponent with Dependence on the Gradient via Mountain Pass Techniques
(Taylor and Francis Inc., 2016)This article deals with a quasilinear elliptic equation with variable exponent under a homogenous Dirichlet boundary-value condition, where nonlinearity also depends on the gradient of the solution. By using an iterative ... -
Electrospraying method for fabrication of essential oil loaded-chitosan nanoparticle delivery systems characterized by molecular, thermal, morphological and antifungal properties
(Elsevier Ltd, 2019)Fabrication of essential oil loaded-chitosan nanoparticles using electrospraying technique appears to be a novel strategy to develop thermally stable nanoparticles possessing higher encapsulation efficiency and particle ... -
Employment of emergency advanced nurses of Turkey: A discrete-event simulation application
(MDPI AG, 2019)In the present study, problems in emergency services (ESs) were dealt with by analyzing the working system of ESs in Turkey. The purpose of this study was to reduce the waiting times spent in hospitals by employing advanced ... -
Energy and exergy analysis of a solid-oxide fuel cell power generation system for an aerial vehicle (ISSA- 2015–139)
(Taylor and Francis Inc., 2018)This paper presents the performance of the solid-oxide fuel cell/gas turbine hybrid power generation system with heat recovery waste unit based on the energy and exergy analyses. The effect of air inlet temperature and ... -
Energy production, consumption, policies and recent developments in Turkey
(2010)Many factors to be appropriately addressed in moving towards energy sustainability in Turkey are examined. These include harnessing sustainable energy sources, utilizing sustainable energy carriers, increasing efficiency, ... -
Engineering properties of medium-to-fine sands injected with microfine cement grout
(2011)This article investigates the penetrability of microfine cement suspensions prepared with Rheocem 900 with and without superplasticizer additive into various graded fine-to-medium sands into which chemical grout permeation ... -
Enhanced Pinning Properties of Laser-Irradiated Bulk MgB2 Superconductors
(Springer New York LLC, 2017)In order to investigate the effect of laser irradiation on the superconducting properties of MgB2, a pellet-shaped sample was produced and cut into two pieces. The dot-shaped molten patterns, with the distance of 100 µm ...