Basit öğe kaydını göster

dc.contributor.authorTekin, İlker
dc.contributor.authorTekin, Duygu
dc.date.accessioned2020-01-26T19:48:57Z
dc.date.available2020-01-26T19:48:57Z
dc.date.issued2018
dc.identifier.issn2147-5881
dc.identifier.urihttps://dx.doi.org/10.5505/pajes.2017.33410
dc.identifier.urihttp://www.trdizin.gov.tr/publication/paper/detail/TXpBMU16RTBOQT09
dc.identifier.urihttps://hdl.handle.net/20.500.12403/1538
dc.description.abstractBu çalışmada, puzolanik özelliğe sahip 45 ?m ve 125 ?m incelikteöğütülmüş Bayburt taşı PÇ 42.5R (CEM I) çimentoda sırasıyla ağırlıkça%0, 10, 20 ve %30 ikame edilmiştir. Çalışmanın amacı iki aşamadaoluşturuldu: birincisi farklı inceliklere sahip zeolit içeren Bayburt taşıatıklarının CEM I tip çimentoya ikame edildikten sonra elde edilençimentonun basınç dayanımı ve fiziksel özelliklerine etkilerinideğerlendirmek, diğeri üretilen çimentoların farklı firmalara ait aynıtip süperakışkanlaştırıcılarla davranışını incelemektir. Hazırlananhamur numuneler üzerinde standart kıvam, priz süreleri ve hacimsabitliği gibi standart çimento deneyleri, harç numuneler üzerindeyayılma ve basınç dayanımı deneyleri gerçekleştirilmiştir. Harçnumuneler 28 gün standart küre bırakılmış ve ardından 2, 7 ve 28 günyaşlarında basınç dayanımı deneyi yapılmıştır. Sonuç olarak özgülyüzeye bağlı olarak değişen incelik fiziksel, mekanik ve reolojiközellikleri önemli derecede etkilemiştir. Bu çalışmada farklı firmalaraait polinaftalin sülfonat tipi süperakışkanlaştırıcıların beyaz Bayburttaşı ikameli çimentolarda kullanılabileceği belirlenmiştir.en_US
dc.description.abstractIn this study, grinded Bayburt Stone has pozzolanic property with 45?m and 125 ?m fineness was replaced with PC 42.5R (CEM-I) typecement at ratio of 0%, 10%, 20%, and 30% by weight. The aim of thisstudy was made up in two phase, one of them was to investigate theeffects of Bayburt Stone waste contain zeolite with different fineness onphysical and mechanical properties of composite cements and the otherone was to investigate behavior of same superplasticizer belong to twodifferent company. Standard consistency, setting time and volumeexpansion tests are performed on the cement pastes and compressionstrength and flow tests are performed on the cement mortars. Mortarspecimens are kept in standard curing for 28 days, than compressivestrength test are performed at the ages of 2, 7 and 28 days. As a result,changes in specific surface area depending on the particle sizedistribution of mineral additives makes significant different on thephysical, mechanical and rheological properties of cement mortars. Inthis study, it was determined that same type of superplasticizers whichhad different companies could be used in blended cement replaced withBayburt stone.en_US
dc.language.isoturen_US
dc.relation.isversionof10.5505/pajes.2017.33410en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titlePolinaftalin sülfonat esaslı süperakışkanlaştıcıların farklı inceliklere sahip Bayburt Taşı ikame edilmiş kompoze çimentoların mekanik ve fiziksel özelliklerine etkisien_US
dc.title.alternativeEffect of the polynaphtalene sulfonate based superplasticizer on mechanical and physical properties of blended cement replaced with Bayburt Stone at different finenessen_US
dc.typearticleen_US
dc.relation.journalPamukkale Üniversitesi Mühendislik Bilimleri Dergisien_US
dc.contributor.departmentBayburt Üniversitesien_US
dc.identifier.volume24en_US
dc.identifier.issue3en_US
dc.identifier.startpage419en_US
dc.identifier.endpage425en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster