Basit öğe kaydını göster

dc.contributor.authorÖzen F.
dc.contributor.authorFiçici F.
dc.contributor.authorDündar M.
dc.contributor.authorÇolak M.
dc.date.accessioned20.04.201910:49:12
dc.date.accessioned2019-04-20T21:43:21Z
dc.date.available20.04.201910:49:12
dc.date.available2019-04-20T21:43:21Z
dc.date.issued2017
dc.identifier.issn0587-4246
dc.identifier.urihttps://dx.doi.org/10.12693/APhysPolA.131.467
dc.identifier.urihttps://hdl.handle.net/20.500.12403/515
dc.description.abstractAluminium alloys have found usage in numerous industries due to some superior properties, such as high strength-to-weight ratios and high oxidation resistance. Aluminum alloys can be strengthened by some techniques. One of them, the most practical one, is precipitation hardening in aluminum alloys. By adding Cu, aluminum gains strength and hardness. In this work the machinability of unalloyed aluminum and aluminum alloyed with 4% and 8% of Cu have been investigated. Machinability assessment was executed in terms of surface roughness during turning operation. Specimens were manufactured by sand casting method, which is a commonly utilized casting operation. In machinability experiments, three different cutting tool materials were employed. Three different cutting speeds and three different feed rates have been used. Effect of these feeds, speeds and cutting tool materials on surface roughness has been studied. In addition, effect of Cu addition to aluminum alloys on surface roughness has been examined. © 2017, Polish Academy of Sciences. All rights reserved.en_US
dc.language.isoengen_US
dc.publisherPolish Academy of Sciences
dc.relation.isversionof10.12693/APhysPolA.131.467
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAge hardening
dc.subjectAluminum
dc.subjectCopper
dc.subjectCopper alloys
dc.subjectCutting tools
dc.subjectHardness
dc.subjectHigh strength alloys
dc.subjectPrecipitation (chemical)
dc.subjectSurface roughness
dc.subjectTurning
dc.subjectCasting operations
dc.subjectCutting speed
dc.subjectEffect of coppers
dc.subjectHigh strength
dc.subjectMachinability assessment
dc.subjectSand castings
dc.subjectTool materials
dc.subjectTurning operations
dc.subjectAluminum alloys
dc.subjectAge hardening
dc.subjectAluminum
dc.subjectCopper
dc.subjectCopper alloys
dc.subjectCutting tools
dc.subjectHardness
dc.subjectHigh strength alloys
dc.subjectPrecipitation (chemical)
dc.subjectSurface roughness
dc.subjectTurning
dc.subjectCasting operations
dc.subjectCutting speed
dc.subjectEffect of coppers
dc.subjectHigh strength
dc.subjectMachinability assessment
dc.subjectSand castings
dc.subjectTool materials
dc.subjectTurning operations
dc.subjectAluminum alloys
dc.titleEffect of copper addition to aluminium alloys on surface roughness in terms of turning operationen_US
dc.typeconferenceObjecten_US
dc.relation.journalActa Physica Polonica Aen_US
dc.contributor.departmentBayburt Universityen_US
dc.contributor.authorID57194089796
dc.contributor.authorID36184134900
dc.contributor.authorID57197977845
dc.contributor.authorID56150550400
dc.identifier.volume131
dc.identifier.issue3
dc.identifier.startpage467
dc.identifier.endpage469
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster