Efficiency improvement of gas turbine cogeneration systems [Poboljšanje u?inkovitosti kogeneracijskih sustava plinske turbine]
In this study eight methods are evaluated for a gas turbine cogeneration cycle to improve the efficiency. These methods are increasing gas turbine inlet air temperature, cooling the inlet air of the compressor, air preheating, fuel preheating, increasing compressor inlet air pressure, increasing air excess rates, steam injection, and humidification of the inlet air of the compressor. These methods are studied in order to compare their effects on the performance of the systems. The effects of these methods on the exergetic efficiency depend on the kind of the cogeneration cycle. By combining recuperation, preheating fuel and steam injection methods high efficiency can be achieved. The combined methods give the best results under variable heat demands of the market. An appropriate combination of the efficiency improvement methods may increase the exergetic efficiency about 20 %. The results show that efficiency improvement methods must be applied together whenever it is possible. © 2017, Strojarski Facultet. All rights reserved.
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
Effects of ambient conditions on performance of gas turbine cogeneration cycles [Çevre Sartlarinin gaz turbInlI kojenerasyon ÇevrImlerInIn performansi ÜzerIne etkIlerI] In this paper, effects of the ambient conditions on performance of cogeneration cycles are analyzed by using exergy analysis method. These cogeneration cycles are the simple cycle, the air preheating cycle, the air-fuel ...
In this study, three different gas turbine cogeneration systems that are preheating air, preheating air-fuel and simple cycles where steam injected in to combustion chamber are analyzed. The effects of steam injection on ...
In this study, some improving methods of gas turbine cogeneration cycles are applied on a simple cogeneration cycle. These methods are preheating air, preheating air and fuel, inlet air cooling by using evaporative cooling ...