Determination of the effect of volcanic pumice replacement on macro void development for blended cement mortars by computerized tomography
Özet
In this study, the effect of volcanic pumice replacements with different ratios on the macro void development was observed using CT for a period of 100 days. The cured mortar specimens were imaged by X-ray CT on different days of the experiment. Utilizing Hounsfield Unit values as guides, void volumes and ratios were identified and measured by Matlab software. SEM images supported the X-ray CT results. It is shown that X-ray CT analysis is capable of assessing the development of macro voids in the mortar specimens. © 2012 Elsevier Ltd. All rights reserved.
Kaynak
Construction and Building MaterialsCilt
35Bağlantı
https://dx.doi.org/10.1016/j.conbuildmat.2012.02.084https://hdl.handle.net/20.500.12403/895
Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Monitoring macro voids in mortars by computerized tomography method
Tekin I.; Birgul R.; Ozgur Yaman I.; Gencel O.; Yilmaz Aruntas H. (Elsevier B.V., 2015)This study aims to investigate the use of ground pumice powder (PP) in cement production and to monitor void developments in mortars by X-ray Computerized Tomography (CT) which is a nondestructive test method. PP-blended ... -
X-ray CT monitoring of macro void development in mortars exposed to sulfate attack
Tekin I.; Birgul R.; Aruntas H.Y. (Techno Press, 2018)This study reports the results of nondestructive monitoring of macro void developments in mortars manufactured with both ordinary Portland cement and sulfate resistant cement. Two types of curing were utilized; tap water ... -
High temperature resistance of boron active belite cement mortars containing fly ash
Gökçe H.S. (Elsevier Ltd, 2019)Boron allowing stability of reactive belite phase in clinker production enhances neutron shielding capability of cement. In the study, neutron attenuation factor of boron active belite cements at various fly ash introduction ...