Comparative study of the magnetic stiffness, levitation and guidance force properties of single and multi seeded YBCOs for different HTS-PMG arrangements
Özet
Abstract It is crucial to improve the magnetic levitation, guidance and stiffness performances of the HTS Maglev systems for real-scale applications. In this study, the magnetic levitation force, guidance force and magnetic stiffness values were determined for single and multi-seeded YBCOs on different PMGs in ZFC regime and different cooling heights (CHs) after the magnetic flux distributions simulation of the using PMGs. Implemented study showed that the additional downward PMs make an enhancing contribution on the magnetic levitation force, guidance force and magnetic stiffness of both single and multi-seeded YBCOs. It was also determined that both the force and stiffness ratios of multi-seeded YBCO to single-seeded YBCO increase with increasing CH, indicating that the multi-seeded YBCO has much more interaction domain than single-seeded at higher gaps. It is considered that the results obtained in this study are very useful in technological applications of Maglev and bearing systems, because there is no detailed study on the magnetic stiffness, levitation and guidance force comparison to clarify electromagnetic behavior of single and multi-seeded YBCOs for different HTS-PMG arrangements. © 2015 Elsevier B.V.
Kaynak
Journal of Alloys and CompoundsCilt
643Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Clarification of magnetic levitation force and stability property of multi-seeded YBCO in point of supercurrent coupling effect
Ozturk K.; Kabaer M.; Abdioglu M.; Patel A.; Cansiz A. (Elsevier Ltd, 2016)In our study as different from the literature, which are mostly related to superconductor fabrication, application and optimization, especially physical origins of bulk supercurrent generation, magnetic levitation and ... -
Effect of magnetic flux distribution and magnetic powder addition on the magnetic levitation force of Sm123 superconductors
Abdioglu M.; Ozturk K.; Kutuk S.; Bolat S.; Yanmaz E. (2012)Sm123 and Sm211 were prepared by melt-powder-melt-growth and solid-state-reaction techniques, respectively, to have the nominal composition of (Sm123) 0.75 (Sm211) 0.25. After the preparation of this composition, the Fe-B ... -
Levitation and guidance force efficiencies of bulk YBCO for different permanent magnetic guideways
Abdioglu M.; Ozturk K.; Gedikli H.; Ekici M.; Cansiz A. (Elsevier Ltd, 2015)The development of superconductor Maglev systems depends on various disciplinary studies due to the inherent composition of available technologies. Because the fabrication cost is very effective on the Maglev, the requirement ...