Bleeding characteristics of high consistency heavyweight concrete mixtures
Özet
Bleeding, a type of static segregation derives from density difference of concrete ingredients in fresh state. Due to having this difference higher than normal weight counterparts, heavyweight concrete is more susceptible to bleeding, thus, this type of concrete is commonly produced in low slump values. In order to give a response to advances and demands in concrete technology, heavyweight concrete mixtures with high slump values were designed at various mixture characteristics, and their bleeding characteristics were researched in the study. For this purpose, totally, thirty-five concrete mixtures with ?150 mm slump values were produced by using common cement replacement materials (silica fume and fly ash), viscosity modifier, and various water/binder ratios at two binder dosages. The mixtures showed excessive bleeding capacities ranged from 0 to 11.7% and bleeding rates ranged from 0 to 5.1 kg/m2/h. Silica fume was found as the most effective admixture for reducing or elimination of the bleeding. Bleeding time generally shorten at high binder content and at high water/binder ratio. It was observed that the bleeding adversely affects the hardened characteristics of heavyweight concrete mixtures. © 2018 Elsevier Ltd
Kaynak
Construction and Building MaterialsCilt
194Bağlantı
https://dx.doi.org/10.1016/j.conbuildmat.2018.11.029https://hdl.handle.net/20.500.12403/323
Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Optimization of reactive powder concrete by means of barite aggregate for both neutrons and gamma rays
Gökçe H.S.; Yalçınkaya Ç.; Tuyan M. (Elsevier Ltd, 2018)High performance concrete has been often preferred in special engineering structures and in challenging composites products. Researchers have recently focused on the radiation shielding characteristics of these type concrete ... -
A new method for determination of dynamic stability of self-consolidating concrete: 3-Compartment sieve test
Gökçe H.S.; Andiç-Çakır Ö. (Elsevier Ltd, 2018)There are many standard test methods and applications to determine or estimate the workability of fresh concrete mixtures, most of them are focused on highly flowable concrete mixtures. Due to its high flowability, ... -
Gamma-ray attenuation coefficients and transmission thickness of high consistency heavyweight concrete containing mineral admixture
Gökçe H.S.; Öztürk B.C.; Çam N.F.; Andiç-Çakır Ö. (Elsevier Ltd, 2018)In the study, high consistency heavyweight concrete mixtures containing barite aggregate were produced by using some common mineral admixtures (viscosity modifier, silica fume and fly ash) at various water/binder ratios ...