Yayıncı "Elsevier Ltd" için listeleme
Toplam kayıt 86, listelenen: 21-40
-
Effect of fly ash and silica fume on hardened properties of foam concrete
(Elsevier Ltd, 2019)In this study, the effects of foam content as well as fly ash and silica fume inclusion on some physical and mechanical properties of foam concrete, subjected to various curing regimes, were researched. Totally, forty-five ... -
Effect of high pressure homogenization (HPH) on microstructure and rheological properties of hazelnut milk
(Elsevier Ltd, 2017)The effect of high pressure homogenization (HPH) on microstructure and rheological properties of hazelnut milks was investigated. Hazelnut milk samples were produced from cold pressed hazelnut cake and homogenized up to ... -
Effect of high-pressure homogenisation on viscosity, particle size and microbiological characteristics of skim and whole milk concentrates
(Elsevier Ltd, 2018)Effect of high-pressure (HPH) homogenisation on milk concentrates were studied. Skim and whole milk concentrates were homogenised at 0–150 and 0–40 MPa, respectively, and viscosity, particle size measurement, microbiological ... -
Effect of onboard PM position on the magnetic force and stiffness performance of multi-seeded YBCO
(Elsevier Ltd, 2015)Abstract In implemented studies before, although some advancements have been achieved in improving on the levitation or guidance force efficiency of YBCOs separately, both of these forces could not been enhanced simultaneously. ... -
Effects of grain size on room temperature deformation behavior of Zn–22Al alloy under uniaxial and biaxial loading conditions
(Elsevier Ltd, 2016)Effects of grain size on room temperature (RT) deformation behavior of superplastic Zn–22Al alloy under uniaxial and biaxial loading conditions were investigated. Two–step equal channel angular pressing (ECAP) and subsequent ... -
Effects of in situ exopolysaccharide production and fermentation conditions on physicochemical, microbiological, textural and microstructural properties of Turkish-type fermented sausage (sucuk)
(Elsevier Ltd, 2016)In this work, the role of in situ exopolysaccharide (EPS) production under different fermentation conditions on physicochemical, microbiological, textural and microstructural properties of sucuk was determined. For this ... -
The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO2 nanoparticles addition in diesel/biodiesel/n-butanol blends
(Elsevier Ltd, 2018)In this study, waste cooking oil biodiesel was mixed with titanium dioxide (TiO2), a metal-based nano particle, and n-butanol (C4H9OH) along with euro diesel to examine their effects on diesel engines. Various ratio of ... -
Electrospraying method for fabrication of essential oil loaded-chitosan nanoparticle delivery systems characterized by molecular, thermal, morphological and antifungal properties
(Elsevier Ltd, 2019)Fabrication of essential oil loaded-chitosan nanoparticles using electrospraying technique appears to be a novel strategy to develop thermally stable nanoparticles possessing higher encapsulation efficiency and particle ... -
An energy prediction algorithm for wind-powered wireless sensor networks with energy harvesting
(Elsevier Ltd, 2017)Energy harvesting (EH) from environmental energy sources has the potential to ensure unlimited, uncontrollable and unreliable energy for wireless sensor networks (WSNs), bringing a need to predict future energy availability ... -
Energy saving potential of heat insulation solar glass: Key results from laboratory and in-situ testing
(Elsevier Ltd, 2016)HISG (heat insulation solar glass) is a recently developed multi-functional glazing technology to mitigate energy consumption of buildings. HISG can generate electricity similar to conventional PV (photovoltaic) glazing ... -
Exergetic interrelation between an heat pump and components
(Elsevier Ltd, 2016)In this study, the relation between the exergetic performance of the heat pump and its components are investigated experimentally by using an air to water heat pump. Moreover, the effects of the working conditions of the ... -
Experimental determination of Drucker-Prager yield criterion parameters for normal and high strength concretes under triaxial compression
(Elsevier Ltd, 2016)In this study, parameters which define Drucker-Prager yield criterion were investigated experimentally for both normal strength concrete (NSC) and high strength concrete (HSC) by triaxial compression tests. Total 16 concrete ... -
An experimental exergetic comparison of four different heat pump systems working at same conditions: As air to air, air to water, water to water and water to air
(Elsevier Ltd, 2013)In this study, we designed a multifunctional heat pump system using just one scroll compressor and which can be run in four different modes, namely air to air, air to water, water to water and water to air, in order to ... -
Gamma-ray attenuation coefficients and transmission thickness of high consistency heavyweight concrete containing mineral admixture
(Elsevier Ltd, 2018)In the study, high consistency heavyweight concrete mixtures containing barite aggregate were produced by using some common mineral admixtures (viscosity modifier, silica fume and fly ash) at various water/binder ratios ... -
GaN thin film deposition on glass and PET substrates by thermionic vacuum arc (TVA)
(Elsevier Ltd, 2015)In this paper, GaN thin film production was realized by thermionic vacuum arc (TVA), a plasma deposition technique, for the first time. We present a new deposition mechanism for GaN thin films with a very short production ... -
Green roofs and facades: A comprehensive review
(Elsevier Ltd, 2018)Based on United Nations Environment Program (UNEP), building sector accounts for 40% of total energy consumption. In European countries, 36% of total greenhouse gas emissions is attributed to buildings. In this respect, ... -
Heavily carbon doped GaAs nanocrystalline thin film deposited by thermionic vacuum arc method
(Elsevier Ltd, 2016)In this paper, we introduced a new different thin film deposition method for heavily carbon doped GaAs. Used method is thermionic vacuum arc (TVA) and first used for the carbon doping process. The method is very fast ... -
High temperature resistance of boron active belite cement mortars containing fly ash
(Elsevier Ltd, 2019)Boron allowing stability of reactive belite phase in clinker production enhances neutron shielding capability of cement. In the study, neutron attenuation factor of boron active belite cements at various fly ash introduction ... -
High temperature superplasticity and deformation behavior of naturally aged Zn-Al alloys with different phase compositions
(Elsevier Ltd, 2018)Two Zn-Al alloys, eutectoid Zn-22Al and dilute Zn-0.3Al, were processed through equal-channel angular pressing (ECAP). The ECAP-processed alloys were subjected to long-term natural aging at room temperature for 120 days ... -
The impact of internal aerogel retrofitting on the thermal bridges of residential buildings: An experimental and statistical research
(Elsevier Ltd, 2016)In this research, internal thermal superinsulation in residential buildings is experimentally and statistically evaluated in terms of potential thermal bridging effects. As a consequence of significant deviations in thermal ...