Yazar "Cuce P.M." seçeneğine göre listele
Listeleniyor 1 - 14 / 14
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe An accurate model for photovoltaic (PV) modules to determine electrical characteristics and thermodynamic performance parameters(Elsevier Ltd, 2017) Cuce E.; Cuce P.M.; Karakas I.H.; Bali T.Accurate and reliable modelling of photovoltaic (PV) modules is necessary for design and performance estimation of PV systems. Manufacturers of PV modules usually provide some basic electrical parameters specified at only one single operating condition, which is commonly known as standard test conditions (STCs). However, PV systems operate over a wide range of outdoor conditions, and the manufacturers’ reports do not cover sufficient information about how the PV modules react with respect to changes in the two most important environment-oriented conditions, which are solar intensity and operating cell temperature. In this respect, an accurate and reliable tool is required by designers to predict electrical characteristics and thermodynamic performance parameters of PV modules. Therefore in this research, a novel mathematical model is developed to determine solar intensity and cell temperature dependency of PV module parameters and thermodynamic efficiency figures. A simple one-diode model is proposed considering series resistance and shunt conductance. Mitsubishi PV-UJ225GA6 225 W polycrystalline silicon PV module and Kyocera KD205GH-2P 205 W multicrystal PV module are utilised for model assessment. Model results are compared with environmental chamber tests and manufacturers’ performance reports, and a very good agreement is achieved. © 2017 Elsevier LtdÖğe Concentrating photovoltaic thermal (CPVT) collectors and systems: Theory, performance assessment and applications(Elsevier Ltd, 2018) Daneshazarian R.; Cuce E.; Cuce P.M.; Sher F.Concentrating photovoltaic thermal (CPVT) collectors and systems are very popular in both domestic and industrial solar energy applications. CPVT collectors provides incomparably greater thermal and electrical outputs compared to stand alone PV or hybrid PVT systems as incoming solar energy is maximised inside the unit via energy-efficient concentrators. Within the scope of this paper, a comprehensive review on CPVT collectors and systems is proposed. For an easier assessment of the findings through state-of-the-art analyses on CPVT collectors, the review is presented in a thematic way. Historical overview of the technology is followed by the detailed description of a CPVT collector with main system elements and thermodynamic performance definitions. The review also covers thermal and electrical performance analysis of CPVT collectors using water or air as working fluid, analytical, numerical, simulation and experimental works for performance evaluation of different design configurations of CPVT systems and qualitative analysis of electrical and thermal energy generation. The impacts of concentrator type and concentration ratio on system efficiency, operating temperature and coefficient of performance (COP) are analysed in detail. It is observed from the findings that CPVT collectors are promising devices in market, and they have a good potential to be competitive with conventional power generation systems in the near future. © 2017 Elsevier LtdÖğe Energy saving potential of heat insulation solar glass: Key results from laboratory and in-situ testing(Elsevier Ltd, 2016) Cuce E.; Cuce P.M.; Young C.-H.HISG (heat insulation solar glass) is a recently developed multi-functional glazing technology to mitigate energy consumption of buildings. HISG can generate electricity similar to conventional PV (photovoltaic) glazing products when exposed to sunlight, however it differs from them by having some extraordinary characteristic features such as thermal insulation, which is competitive with Argon filled triple glazed windows, acoustic comfort, remarkable energy saving potential and self-cleaning ability owing to TiO2 nano coating. Within the scope of this research, latest results from laboratory and in-situ testing of HISG are presented in terms of its key role in mitigating heating and cooling demand of buildings as well as clean energy generation. Lighting and thermal comfort related parameters such as shading coefficient, UV, IR and visible light intensity are also investigated through the tests conducted in real operating conditions. It is achieved from the results that instant electricity generation of HISG is 16% higher than that of standard PV glazing owing to its nano layer reflective film. Shading coefficient of HISG is only 0.136, which provides almost 80% reduction in solar heat gain compared to ordinary glazing. Indoor air temperature measured from HISG test house in summer time is very close to the ambient temperature, whereas it is found to be 14.7 °C higher in ordinary glass test house due to greenhouse effect. Annual heating and cooling demand tests indicate that HISG provides 38 and 48% energy saving in heating and cooling season, respectively. © 2016 Elsevier Ltd.Öğe Heat transfer enhancement in cylindrical fins through longitudinal parabolic perforations(Taylor and Francis Ltd., 2019) Cuce E.; Oztekin E.K.; Cuce P.M.In our previous works, it is clearly addressed that optimisation of fin profile is of vital importance in terms of the rate of heat transfer from a hot surface, and the optimisation procedure depends on several factors. Within the scope of this research, a longitudinal cylindrical fin profile is under interest for the optimisation research. The purpose is to investigate the effects of longitudinal parabolic perforations on the fin parameters such as temperature distribution, effectiveness and efficiency, in which the fin surface is cooled by natural convection and radiation. Different concavity levels are considered to form parabolic perforations. The rate of heat transfer from fin surface is numerically correlated with the fin mass with respect to different concavity levels. According to results, heat transfer from unit fin mass is enhanced with the new designs. The outcome of the study can be used to optimise the needs for particular applications by making a decision between heat loss and weight options. That is, the increase in the concavity level of the perforation results in a lighter and cheaper design, but yielding a lower heat loss. However, heat transfer from unit mass is still enhanced. © 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group.Öğe The impact of internal aerogel retrofitting on the thermal bridges of residential buildings: An experimental and statistical research(Elsevier Ltd, 2016) Cuce E.; Cuce P.M.In this research, internal thermal superinsulation in residential buildings is experimentally and statistically evaluated in terms of potential thermal bridging effects. As a consequence of significant deviations in thermal resistance values in buildings at post-retrofit, large amounts of heat losses occur through non-insulated building elements such as separating walls. Therefore, it is of vital importance to determine the level of energy loss due to such thermal bridges through an internal thermal superinsulation retrofit conducted in a typical UK building. 20 mm thick fibre-silica opaque aerogel blanket is implemented internally on the walls of a test bedroom, and the heat flux from the separating wall is measured and compared for the cases of pre and post-retrofit. The results reveal that the average amount of heat loss through the non-insulated separating wall at the post-retrofit is 5.86 W/m2, whereas it is only 0.66 W/m2 at the pre-retrofit. The results are also verified through a statistical model, which is presented for the first time in literature. The novel model is capable of providing information about potential energy loss from non-insulated walls as a function of location. © 2016 Elsevier B.V. All rights reserved.Öğe Novel glazing technologies to mitigate energy consumption in low-carbon buildings: A comparative experimental investigation(John Wiley and Sons Ltd, 2016) Cuce E.; Cuce P.M.; Riffat S.Buildings play a key role in total world energy consumption as a consequence of poor thermal insulation characteristics of facade materials. Among the elements of a typical building envelope, windows are responsible for the greatest energy loss because of their notably high overall heat transfer coefficients. About 60% of heat loss through the building fabric can be attributed to the glazed areas. In this respect, novel cost-effective glazing technologies are needed to mitigate energy consumption, and thus to achieve the latest targets toward low/zero carbon buildings. Therefore in this study, three unique glazing products called vacuum tube window, heat insulation solar glass and solar pond window which have recently been developed at the University of Nottingham are introduced, and thermal performance analysis of each glazing technology is done through a comparative experimental investigation for the first time in literature. Standardized co-heating test methodology is performed, and overall heat transfer coefficient (U-value) is determined for each glazing product following the tests carried out in a calibrated environmental chamber. The research essentially aims at developing cost-effective solutions to mitigate energy consumption because of windows. The results indicate that each glazing technology provides very promising U-values which are incomparable with conventional commercial glazing products. Among the samples tested, the lowest U-value is obtained from the vacuum tube window by 0.40W/m2K, which corresponds to five times better thermal insulation ability compared to standard air filled double glazed windows. © 2016 John Wiley & Sons, Ltd.Öğe A novel method based on thermal conductivity for material identification in scrap industry: An experimental validation(Elsevier B.V., 2018) Cuce E.; Cuce P.M.; Guclu T.; Besir A.; Gokce E.; Serencam U.; Serencam H.Fast, accurate and reliable identification and sorting of materials is still a challenge in recycling sector. Scrap metals are often classified through density and colour, which cause notable financial burdens to the companies in most cases. Within the scope of this research, a novel method based on thermal conductivity is presented for material identification in scrap industry. The unit consists of a constant heat flux source and a cooling system, in which axial heat conduction is enabled and radial heat transfer is eliminated. For the steady-state conditions, temperature gradient across the sample metals is measured along with the constant heat flux value, and the thermal conductivity of the samples is determined via the Fourier's heat conduction law. Copper, brass and stainless steel samples are considered in this research to verify the accuracy of the results. For a reliable and scientific approach, three independent sets of experiments are conducted, and the results are evaluated in terms of accuracy and consistency. Experimental thermal conductivity values of the said samples are compared with the reported data in literature and a good accordance is achieved. Error in measurements is calculated to be 1.37, 3.31 and 4.46% for copper, brass and stainless steel sample, respectively which is acceptable. The tests are repeated with highly sensitive probes for aluminium sample, and the measurement error is calculated to be 0.56%. © 2018 Elsevier LtdÖğe A novel roof type heat recovery panel for low-carbon buildings: An experimental investigation(Elsevier Ltd, 2016) Cuce P.M.; Cuce E.; Riffat S.Energy saving and its efficient utilization is of prime interest in today's world due to the limited energy resources and growing significance of environmental issues. Despite the intensive efforts to narrow the gap between conventional energy sources (wood, coal, gas, oil, etc.) and renewables, renewable energy resources currently supply only about 14% of total world energy demand. In this regard, energy management and optimization are considered compulsory as much as the clean energy generation. Recent works indicate that the buildings play a significant role on global energy consumption. They are responsible for about 40% of global energy demand. Among the different building types, domestic buildings have the largest share with 63% and most of energy is utilized for heating, ventilation and air conditioning (HVAC) systems in those buildings. Energy consumption levels of buildings can be notably reduced through waste heat recovery in HVAC systems. There are several attempts in literature addressing the possibility of decreasing energy consumption of buildings via waste heat recovery technologies. The heat recovery technologies are cost effective and user friendly applications. The use of heat recovery systems aims at mitigating the energy consumption for HVAC applications as well as the greenhouse gas emissions, and hence decreasing the adverse effects of global warming on the Earth. It is well-documented in literature that the heat recovery systems are very promising for domestic applications. In this paper, experimental results of a novel heat recovery system developed for low-carbon buildings are presented. The proposed heat recovery system consists of a plate-type heat exchanger, blower fans and ducts. The parallel-flow arrangement is used to run the system. The system is designed as under roof application. The aim of the system is to recover waste heat and to preheat fresh air using stale air. The experiments of the system are carried out in winter season in Kent, UK. The study aims to investigate the coefficient of performance (COP) of the system as well as the heat recovery efficiency. The results show that the heat recovery efficiency of the proposed system is around 89% while the COP is 4.5. The proposed system can be used in both winter and summer conditions without requiring additional work. Its labor cost is extremely low, so it is cost-effective and user friendly. © 2015 Elsevier B.V. All rights reserved.Öğe Renewable and sustainable energy saving strategies for greenhouse systems: A comprehensive review(Elsevier Ltd, 2016) Cuce E.; Harjunowibowo D.; Cuce P.M.In this study, a comprehensive review focusing on key strategies of energy saving and climate control technologies for greenhouses is presented. Following the brief and concise assessment of existing greenhouse systems in terms of their role in total energy consumption; cost-effective, energy-efficient and environmentally friendly technologies are analyzed in detail for potential utilization in greenhouses for notable reductions in energy consumption and emission levels. The technologies considered within the scope of this research are mainly renewable and sustainable based solutions such as photovoltaic (PV) modules, solar thermal (T) collectors, hybrid PV/T collectors and systems, phase change material (PCM) and underground based heat storage techniques, energy-efficient heat pumps, alternative facade materials for better thermal insulation and power generation (heat insulation solar glass, PV glazing, aerogel and vacuum insulation panel, polycarbonate sandwich panels), innovative ventilation technologies using pre-heating and cooling (high performance windcatchers) and efficient lighting systems. The findings from the research clearly reveal that up to 80% energy saving can be achieved through appropriate retrofit of conventional greenhouses with a payback period of 4-8 years depending on climatic conditions and crop type. © 2016 Elsevier Ltd.Öğe Solar Pond Window Technology for Energy-Efficient Retrofitting of Buildings: An Experimental and Numerical Investigation(Springer Verlag, 2017) Cuce E.; Cuce P.M.Windows are responsible for an important proportion of heat loss from building envelope due to inadequate insulative characteristics of traditional glazing products. In this respect, advanced glazing solutions are of vital importance to mitigate energy demand of buildings, thus to reduce carbon emissions. Therefore, in this research, a novel glazing technology called solar pond window is introduced, and it is numerically and experimentally investigated for different design configurations. The optimum design of this novel glazing covers four 5-mm-thick glass panes, two 20-mm-thick water layers, and one 20-mm-thick Krypton layer in the middle. The average heat transfer coefficient (U-value) of the optimum case is found to be about 0.40 W/m 2 K. If air is used as insulative gas in the interlayer, the U-value of the glazing is determined to be around 0.90 W/m 2 K, which is still competitive with the U-value range of argon-filled triple-glazed windows with low-e coatings. The fabrication cost of the optimum design of solar pond window is around €120/m 2. Overall, solar pond window technology is a cost-effective and energy-efficient glazing, which has a great potential to be the future of fenestration products as well as being capable of meeting the latest building fabric standards. © 2016, King Fahd University of Petroleum & Minerals.Öğe Strategies for ideal indoor environments towards low/zero carbon buildings through a biomimetic approach(Taylor and Francis Ltd., 2019) Cuce E.; Nachan Z.; Cuce P.M.; Sher F.; Neighbour G.B.Biomimicry is a relatively new discipline of applied science that seeks inspiration from natural systems for innovative solutions to human problems. Taking nature as ‘model, mentor and measure’ receives wide acceptance in the field of architecture but predominantly in conceptualising novel forms. The biomimicry concept is comprehensively analysed for its ability to provide more sustainable and possibly even regenerative built environments. As part of this study, first, various frameworks for approaching ‘biomimicry’ in general are discussed and then relevant examples pertaining to architecture are evaluated. Case studies are critiqued with respect to varied levels of sustainability achieved and its causative factors. In the second part, an approach model for ‘biomimetic architecture’ in the context of Mumbai is presented and applicable strategies based on climatic adaptation are suggested using local biodiversity as a library of organisms. The generic example of ‘human skin’ addressing the same adaptation is analysed and complemented by a state-of-the-art case study on similar lines. The results achieved clearly reveal that biomimicry is a successful approach to design and operate the sustainable built environments for the buildings of the future. © 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group.Öğe Thermal performance assessment of a novel liquid desiccant-based evaporative cooling system: An experimental investigation(Elsevier Ltd, 2017) Cuce P.M.Energy consumption in buildings due to heating, cooling and air conditioning (HVAC) systems has a steadily growing trend as a consequence of enhanced indoor thermal comfort conditions. The role of cooling in HVAC oriented energy consumption is remarkable especially in regions with extreme climatic conditions such as Africa and Middle East. In hot and arid climates, cooling demand is usually met by cost-effective evaporative cooling solutions. However, in hot and humid climates, evaporative cooling systems are not capable of providing cooling as the outdoor air is already almost saturated in most cases. Therefore in this research, a novel desiccant-based evaporative cooling system is presented. For different values of inlet supply air temperature and relative humidity provided by a standard environmental chamber, temperature and relative humidity values are measured experimentally at the inlet and outlet of dehumidification and humidification unit, respectively. Since the main purpose of the system developed is to provide cost-effective thermal comfort conditions especially in humid climates, dehumidification effectiveness is calculated for each case tested. The results indicate that the system provides attractive findings for temperate and humid climatic conditions, where stand-alone evaporative cooling systems are inconclusive. For a case of average inlet relative humidity of 94.7% and average inlet air temperature of 38.6 °C, the average outlet relative humidity and air temperature are determined to be 65.5% and 33.3 °C, respectively. An average of 5.3 °C reduction is achieved in supply air temperature as well as an average of 63.7% dehumidification effectiveness which is attractive and promising. © 2016 Elsevier B.V.Öğe Toward cost-effective and energy-efficient heat recovery systems in buildings: Thermal performance monitoring(Elsevier Ltd, 2017) Cuce P.M.; Cuce E.Recent studies show that it is possible to reduce heating or cooling demand of a building as using heat recovery systems. Heat recovery technology is basically utilised to mitigate the heat loss, and hence energy consumption due to HVAC. Within the scope of this study, thermal comfort analyses of a test house integrated with a novel polycarbonate heat exchanger are conducted. At pre and post-retrofit case, temperature, relative humidity and CO2 measurements are carried out for a test period of one week. The results indicate that the internal CO2 concentration is not at desirable range due to lack of ventilation in the test house at the pre-retrofit case. However, following the integration of the novel ventilation system into the test house, CO2 concentration is found to be varying notably from 350 to 400 ppm which corresponds to the actual comfort conditions for indoor environments. It is also concluded from the results that the average relative humidity inside the test house at the post-retrofit case is found to be 57%, which is in the desired range whereas it is considerably high before retrofitting. © 2017 Elsevier LtdÖğe Vacuum glazing for highly insulating windows: Recent developments and future prospects(Elsevier Ltd, 2016) Cuce E.; Cuce P.M.A comprehensive review of vacuum glazing technology from state-of-the-art developments to future prospects has been presented. The review has been conducted in a thematic way in order to allow an easier comparison, discussion and evaluation of the findings. First, a thorough overview of historical development of vacuum glazing has been given. Then, numerous experimental, theoretical, numerical and simulation works on the scope have been evaluated and the characteristic results from the said works have been analyzed. Commercial vacuum glazing products in market have been assessed in terms of several performance parameters such as overall heat transfer coefficient, visible light transmittance, solar heat gain coefficient and cost. Techno-economic and environmental aspects of vacuum glazing technology have also been discussed. It can be concluded from the results that overall heat transfer coefficient of a vacuum glazing can be reduced up to 0.20 W/m2K through optimized integrations with low-e coatings. The incomparable U-value range of vacuum glazing enables significant mitigation in energy consumption levels and greenhouse gas emissions. Retrofitting 25.6 million homes in the UK with vacuum glazing can provide a carbon abatement of about 40 million tonnes a year, which is very promising. © 2015 Elsevier Ltd.
