Yazar "Sagdic O." seçeneğine göre listele
Listeleniyor 1 - 7 / 7
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Characterization of chemical, molecular, thermal and rheological properties of medlar pectin extracted at optimum conditions as determined by Box-Behnken and ANFIS models(Elsevier Ltd, 2019) Al-Amoudi R.H.; Taylan O.; Kutlu G.; Can A.M.; Sagdic O.; Dertli E.; Yilmaz M.T.In this work, response surface methodology and adaptive neuro-fuzzy inference system approaches were used to predict and model effect of extraction conditions of pectin from medlar fruit (Mespilus germanica L.). The pectin extracted at optimized conditions (89 °C, 4.83 h and 4.2 pH) could be classified as high methoxyl pectin. Sugar composition analysis showed that pectin was mainly composed of D-galacturonic acid, L-arabinose, L-rhamnose, D-galactose and D-glucose. Fourier Transform Infrared Spectroscopy, RAMAN and nuclear magnetic resonance spectra confirmed molecular structure, revealing presence of D-galacturonic acid backbone. X-ray diffraction patterns revealed an amorphous structure. Differential scanning calorimetry showed endothermic (123 °C) and exothermic peaks (192 °C). Thermogravimetric analysis revealed three decomposition regions, 50–225 °C, 225–400 °C and 400–600 °C. Steady and dynamic shear analyses revealed that pectin had a pseudo-plastic behavior with storage (G?) and loss (G?) modulus increasing with increment in frequency, indicating viscoelastic structure more predominantly elastic than viscous. © 2018 Elsevier LtdÖğe Development of a fermented ice-cream as influenced by in situ exopolysaccharide production: Rheological, molecular, microstructural and sensory characterization(Elsevier Ltd, 2016) Dertli E.; Toker O.S.; Durak M.Z.; Yilmaz M.T.; Tatlisu N.B.; Sagdic O.; Cankurt H.This study aimed to investigate the role of in situ exopolysaccharide (EPS) production by EPS+ Streptococcus thermophilus strains on physicochemical, rheological, molecular, microstructural and sensory properties of ice cream in order to develop a fermented and consequently functional ice-cream in which no stabilizers would be required in ice-cream production. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 32, 37 and 42°C and time; 2, 3 and 4 h) on pH, S. thermophilus count, EPS amount, consistency coefficient (K), and apparent viscosity (?50) were investigated and optimized using single and multiple response optimization tools of response surface methodology. Optimization analyses indicated that functional ice-cream should be fermented with strain 1 or strain mixture at 40-42°C for 4 h in order to produce the most viscous ice-cream with maximum EPS content. Optimization analysis results also revealed that strain specific conditions appeared to be more effective factor on in situ EPS production amount, K and ?50 parameters than did fermentation temperature and time. The rheological analysis of the ice-cream produced by EPS+ strains revealed its high viscous and pseudoplastic non-Newtonian fluid behavior, which demonstrates potential of S. thermophilus EPS as thickening and gelling agent in dairy industry. FTIR analysis proved that the EPS in ice-cream corresponded to a typical EPS, as revealed by the presence of carboxyl, hydroxyl and amide groups with additional ?-glycosidic linkages. SEM studies demonstrated that it had a web-like compact microstructure with pores in ice-cream, revealing its application possibility in dairy products to improve their rheological properties. © 2015 Published by Elsevier Ltd.Öğe Effect of in situ exopolysaccharide production on physicochemical, rheological, sensory, and microstructural properties of the yogurt drink ayran: An optimization study based on fermentation kinetics(Elsevier Inc., 2015) Yilmaz M.T.; Dertli E.; Toker O.S.; Tatlisu N.B.; Sagdic O.; Arici M.Exopolysaccharide (EPS)-producing starter cultures are preferred for the manufacture of fermented milk products to improve rheological and technological properties. However, no clear correlation exists between EPS production and the rheological and technological properties of fermented milk products such as the yogurt drink ayran. In this study, 4 different strain conditions (EPS- and EPS+ Streptococcus thermophilus strains) were tested as a function of incubation temperature (32, 37, or 42°C) and time (2, 3, or 4 h) to determine the effect of culture type and in situ EPS production on physicochemical, rheological, sensory, and microstructural properties of ayran. Furthermore, we assessed the effect of fermentation conditions on amounts of EPS production by different EPS-producing strains during ayran production. A multifactorial design of response surface methodology was used to model linear, interaction, and quadratic effects of these variables on steady shear rheological properties of ayran samples and in situ EPS production levels. The physicochemical and microbiological characteristics of ayran samples altered depending on incubation conditions and strain selection. Steady shear tests showed that ayran samples inoculated with EPS+ strains exhibited pseudoplastic flow behavior. Production of ayran with EPS- strain (control sample) resulted in the lowest apparent viscosity values (?50), whereas those produced with the combination of 2 EPS+ strains yielded ayran with notably increased ?50 values. We concluded that incubation time was the variable with the greatest effect on ?50, consistency coefficient (K), and flow behavior index (n) values. In situ EPS production was also affected by these conditions during ayran fermentation in which strain-specific metabolism conditions were found to be the most important factor for EPS production. In addition, these findings correlated the amount of in situ EPS produced with the rheological properties of ayran. Scanning electron microscopy images of the samples showed differences in structural features, revealing a prominent network strand structure in the ayran samples inoculated with the admixture of 2 EPS-producing strains incubated at 37°C for 3 h. These results provide useful information for large-scale production of ayran by the dairy industry. © 2015 American Dairy Science Association.Öğe Effects of in situ exopolysaccharide production and fermentation conditions on physicochemical, microbiological, textural and microstructural properties of Turkish-type fermented sausage (sucuk)(Elsevier Ltd, 2016) Dertli E.; Yilmaz M.T.; Tatlisu N.B.; Toker O.S.; Cankurt H.; Sagdic O.In this work, the role of in situ exopolysaccharide (EPS) production under different fermentation conditions on physicochemical, microbiological, textural and microstructural properties of sucuk was determined. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 14, 16 and 18 °C and time; 8, 12 and 16 days) on physicochemical, microbiological, textural and microstructural properties were investigated using response surface methodology. In situ EPS production was observed to remarkably affect these properties while fermentation conditions were also seen to dominantly influence the physicochemical properties of sucuk, revealing that the ripening temperature appeared to be more determinant factor. EPS producing cultures enhanced the textural properties of sucuk which became harder, less adhesive and tougher. The microstructural analysis revealed the formation of web-like structure by in situ EPS production in sucuk mix during fermentation process. This study revealed the importance of in situ EPS production on final technological properties of sucuk. © 2016 Elsevier Ltd.Öğe Electrospraying method for fabrication of essential oil loaded-chitosan nanoparticle delivery systems characterized by molecular, thermal, morphological and antifungal properties(Elsevier Ltd, 2019) Yilmaz M.T.; Yilmaz A.; Akman P.K.; Bozkurt F.; Dertli E.; Basahel A.; Al-Sasi B.; Taylan O.; Sagdic O.Fabrication of essential oil loaded-chitosan nanoparticles using electrospraying technique appears to be a novel strategy to develop thermally stable nanoparticles possessing higher encapsulation efficiency and particle stability. This study aims to fabricate chitosan nanoparticles (CNPs) loaded with Origanum vulgare essential oil (OEO, Origanum vulgare L.) at different proportions (OEO/CH proportions of 0:1, 0.0625:1, 0.125:1, 0.25:1 and 0.5:1 mL/g) using electrospraying technique. The CNPs were characterized in term of their particle size and stability (dynamic light scattering), encapsulation efficiency (spectrophotometry), and molecular (Fourier transform infrared spectroscopy), thermal (differential scanning calorimetry/thermogravimetric analysis), morphological (scanning electron microscopy) and antifungal (agar dilution method) and fungistatic activity properties. The average particle sizes of the CNPs ranged between 290 and 483 nm with a spherical morphology. Positively charged surface characteristics were observed to increase with the increment of OEO concentration in CNPs. The encapsulation efficiency values were determined in the range of 70.1 and 79.6%. The molecular and thermal analyses exposed very decent encapsulation of OEO into thermally stable chitosan nanoparticles. Morphological analysis verified the spherical shapes of these nanoparticles. Above all, the antifungal effectiveness of OEO against the Alternaria alternata AY1 could be significantly (p < 0.05) increased by its encapsulation into chitosan nanoparticles fabricated by the electrospraying technique. Consequently, it can be stated that the electrospraying technique developed is able to fabricate thermally stable nanoparticles owning higher encapsulation efficiency and particle stability. The results and findings suggest that the electrospraying technique would be a promising method to fabricate chitosan-based nanoparticles as an antimicrobial agent to control their release in a prolonged preservative effect in cosmetic, pharmaceutical and food applications for adjustable dosage forms. Industrial relevance: The fungal agents such as Alternaria alternata cause great damages on post-harvest fresh fruits and vegetables, thus leading to a great economical lose. Therefore, a great variety of methods in struggling with disease have been previously proposed. Nowadays, the most effective leading methods to struggle against plant diseases are those applied with synthetic fungicides to minimize such lose in post-harvest fruit and vegetables. However, intensive and unconscious use of the fungicides leads the pathogens to develop resistance against these agents as well as to accumulation of chemical residues in soil, water and air and finally to formation of carcinogenic effects on human health. Nowadays, a great effort is being exerted to develop novel biodegradable and natural antimicrobial agents for struggling fungal spoilage in postharvest products. Essential oils are among the most widely used natural struggling methods. Essential oils obtained from plants have been extensively used since they are natural antimicrobial agents. However, they cannot be effectively used in spite of their extensive applications. Recently, some researches in the field of nanotechnology have demonstrated that the effectiveness of active substances could be increased by using some techniques. In this respect, we aimed at developing essential-oil-loaded-chitosan-nanoparticle delivery systems using an electrospraying deposition system to prevent fungal colonization on food and plant materials. By increasing antifungal effectiveness of essential oils by their encapsulation into nanoparticles, it will be possible to decrease the levels of regularly applied dose and reflect the obtained outcomes to the food and agriculture industry. This study is the first example of production of essential oil loaded nanoparticles using the electrospraying-hydrodynamic process and showed that encapsulation of oregano essential oil into chitosan based nanoparticles (CNPs) by using the electrospraying deposition technique considerably increased the antifungal effectiveness of the Origanum vulgare essential oil. Our results highlight the potential use of the chitosan nanoparticles (CNPs) loaded with different amounts of Origanum vulgare in food and agriculture industry as an effective fungicidal material against Alternaria alternata, suggesting that the CNPs can be promising tools to compete with synthetic fungicide counterparts and limit use of synthetic ones for struggling of food and plant pathogens. Therefore, the results of this study should be of great importance to industrial applications in terms of development of natural, but effective preservatives as alternative to synthetic ones. In this respect, the CNPs would find a great industrial application area in the food and agriculture industry which seek natural preservatives due to the recent health concerns. © 2018Öğe Physicochemical characterisation of an ?-glucan from Lactobacillus reuteri E81 as a potential exopolysaccharide suitable for food applications(Elsevier Ltd, 2019) İspirli H.; Sagdic O.; Yılmaz M.T.; Dertli E.Lactobacillus reuteri strain (E81) is an alpha glucan producer from traditional sourdough and the physicochemical characteristics of this glucan was determined in this study. The HPLC analysis confirmed the presence of glucose as the only sugar monomer in the repeating structure of this exopolysaccharide (EPS). The functional groups within the glucan structure was detected by FTIR analysis. The scanning electron microscopy (SEM) analysis demonstrated the web-like branched structure of the glucan. Morphological characterisation of the glucan E81 by atomic force microscopy (AFM) analysis showed clear roundness lumps and chains. Importantly, thermal characteristics of glucan E81 determined by thermogram analysis (TGA) and differential scanning calorimeter (DSC) analysis revealed that glucan E81 has a melting point of 290 °C making it promising to be used in thermal processed foods including sourdough bread. © 2018 Elsevier LtdÖğe Steady, dynamic and creep rheological analysis as a novel approach to detect honey adulteration by fructose and saccharose syrups: Correlations with HPLC-RID results(Elsevier Ltd, 2014) Yilmaz M.T.; Tatlisu N.B.; Toker O.S.; Karaman S.; Dertli E.; Sagdic O.; Arici M.In this study, natural honey was adulterated with the addition of adulterants, namely saccharose and fructose syrups at a ratio of 0%, 10%, 20%, 30%, 40% and 50% by weight. Steady, dynamic and creep tests were conducted, revealing that the changes in the flow, viscoelastic and creep behavior of natural honey were clear and remarkable. Syrup addition decreased viscosity (?), storage (G') and loss modulus (G?) values of the control honey samples. Deformation represented by the compliance (J(t)) values was more prominent in the adulterated honey samples. In addition, HPLC-RID analysis was conducted to determine major sugar composition of the adulterated samples. Pearson's correlation test indicated that there were significant (P<0.05; 0.01) correlations between sugar composition and rheology parameters, ? (viscosity), K?, K* (intercepts for G? and complex modulus (G*), respectively) and ?0 (viscosity of Maxwell dashpot), suggesting that K', K?, K* and ?0 could be prominent indicators for presence of saccharose or fructose syrups added in natural honey within the studied concentration levels. These results suggested that use of steady, dynamic and creep analysis would be a novel and potential approach to detect honey adulteration by fructose and saccharose syrups. © 2014.
