Yazar "Ucurum M." seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim Yok
    Öğe
    Applicability of statistical process control for surface modification plant and properties of coated calcite
    (Oficyna Wydawnicza Politechniki Wroclawskiej, 2016) Ucurum M.; Malgir E.; Deligezen H.; Karaer N.; Avsar M.
    Due to its low surface energy, easy dispersion, high homogeneity and whiteness, coated (modified) calcite has increasingly been used in many industries, particularly in the plastics. The demand for this product will most likely increase in the years to come. Surface modification of calcite with a fatty acid would lead to a great expansion of industrial applications. The color values of coated calcite products are the first quality parameter. Therefore, it is very important to monitor the variations in the color characteristics of the coated calcite products. It is well known that statistical process control (SPC) techniques have been widely used in the many industries. In the present study, the surface of micronized calcite was coated with stearic acid by a pin mill. X-R control graphics and process capability index were applied for monitoring variations in quality control based on color parameters (L*,a*and b*) for the pin mill plant. In addition, active ratio, particle size distribution, whiteness parameters, BET, FTIR, TGA-DTA and SEM were then determined on a coated calcite sample. The results show that the pin mill plant seems under control and the coating technology is very effective in modifying the surface of micronized calcite.products.
  • Küçük Resim Yok
    Öğe
    Changes of surface properties of calcite particles with calcium stearate using conventional experimental design and properties of coated calcite
    (Oficyna Wydawnicza Politechniki Wroclawskiej, 2018) Ucurum M.; Bayram O.; Toraman O.Y.; Kilic H.; Yalcin S.
    Calcite is utilized as a filler mineral in the industries such as plastics, rubber, and paint, to gain products with a variety of features. In order to use a calcite ore as a filler, some specific physical and physico-chemical properties are required such as ultra-fine sizes and conversion of hydrophilic to hydrophobic structure. In the present study, for these purposes, surfaces of the ultra-fine calcite powder (d50=2.94 ?m) were coated by a mechano-chemical process with calcium stearate [Ca(C17H35COO)2] in a stirred ball mill. The influence of operating parameters such as calcite filling-ratio, ball-filling ratio, operation speed, grinding time and chemical dosage on the active ratio (%) was systematically examined. Then, the properties of modified calcite product were measured and evaluated by contact angle, TGA, DTA, FTIR, and SEM. The results showed that the mechano-chemical technology is very effective for modifying the surface of micronized calcite products using calcium stearate chemical. © Wroclaw University of Science and Technology.