Experimental Investigation of Springback of DC Series Steel Sheet in V-Bending Process
Küçük Resim Yok
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Bayburt University
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Sheet materials, which are commonly used in sectors such as automotive and whitewares, are usually formed by applying bending operations. The most important problem encountered in bending processes is springback. Springback problem arising from elastic behavior of the material complicates the assembly of manufactured part due to dimensional differences and causes financial loss. For this reason, it is required to properly estimate the springback behavior to provide the dimensional integrity and cost savings of the shaped parts as a result of the bending operations. In this study, the springback behavior of DC series sheet metals forming by V bending was experimentally investigated the different process parameter of material quality, thickness, rolling direction and die angle. The sheet metals have the quality of DC01, DC04 and DC05 and the thickness of 1, 1.5 and 2 mm. The V-bending dies have 60, 90 and 120o angles. From the experimental studies, it is seen that the behavior of springback changes depending on the die and the process parameters.
Açıklama
Anahtar Kelimeler
Mechanical Engineering, Makine Mühendisliği
Kaynak
Bayburt Üniversitesi Fen Bilimleri Dergisi
Bayburt Üniversitesi Fen Bilimleri Dergisi
Bayburt Üniversitesi Fen Bilimleri Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
2
Sayı
2
