Numerical investigation of the Mode I/Mode II fracture behavior of the hybrid composite joints with a hybrid bondline

Basit Öğe Kaydı
dc.contributor.authorErbayrak, Engin
dc.date.accessioned2024-10-04T18:58:45Z
dc.date.available2024-10-04T18:58:45Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractIn this study, the fracture behavior of fracture characterization bonded joints consisting of hybrid composite adherends and hybrid bondlines under Mode I and Mode II loadings were investigated numerically. Numerical analysis was performed using LS-DYNA. Hybrid composite laminates (HCGFRE) obtained by sequencing plain woven glass fiber reinforced epoxy (GFRE) and plain woven carbon fiber reinforced laminates (CFRE) as adherends. Araldite AV138M and Araldite 2015 epoxy adhesives were also used to create the hybrid bondline. Mode I and mode II fracture behaviors were determined by numerical modeling of the Double Cantilever Beam (DCB) and End Notched Flexural (ENF) tests, respectively. In the numerical model, firstly, the fracture parameters of the relevant adhesives were found in the literature, and verification was made utilizing the numerical model. Then, the fracture behavior in both two modes was examined by forming a hybrid bondline. In the literature, there are restricted studies examining the fracture behavior of fracture characterization bonded joints with hybrid bondlines. Additionally, it is not encountered any study determining the both mode I and mode II fracture behavior of composite fracture characterization bonded joints with hybrid bondlines. Therefore, it is thought that this study will gain significant novelties to the existing literature. © 2023 The Author(s)en_US
dc.identifier.doi10.1016/j.jer.2023.100101
dc.identifier.endpage535en_US
dc.identifier.issn2307-1877
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85185916323en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage526en_US
dc.identifier.urihttps://doi.org/10.1016/j.jer.2023.100101
dc.identifier.urihttp://hdl.handle.net/20.500.12403/4014
dc.identifier.volume11en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier B.V.en_US
dc.relation.ispartofJournal of Engineering Research (Kuwait)en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectA mixed-mode cohesive zone modelen_US
dc.subjectDCBen_US
dc.subjectENFen_US
dc.subjectHybrid bondlineen_US
dc.subjectHybrid Composite laminateen_US
dc.titleNumerical investigation of the Mode I/Mode II fracture behavior of the hybrid composite joints with a hybrid bondlineen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu