Computational contact mechanics for a medium consisting of functionally graded material coating and orthotropic substrate

Basit Öğe Kaydı
dc.contributor.authorÖner, Erdal
dc.date.accessioned2024-10-04T19:04:13Z
dc.date.available2024-10-04T19:04:13Z
dc.date.issued2021
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThis paper presents a semi-analytical method to investigate the frictionless contact mechanics between a\rfunctionally graded material (FGM) coating and an orthotropic substrate when the system is indented by a\rrigid flat punch. From the bottom, the orthotropic substrate is completely bonded to the rigid foundation. The\rbody force of the orthotropic substrate is ignored in the solution, while the body force of the FGM coating is\rconsidered. An exponential function is used to define the smooth variation of the shear modulus and density\rof the FGM coating, and the variation of Poisson’s ratio is assumed to be negligible. The partial differential\requation system for the FGM coating and the orthotropic substrate is solved analytically through Fourier\rtransformations. After applying boundary and interface continuity conditions to the mixed boundary value\rproblem, the contact problem is reduced to a singular integral equation. The Gauss–Chebyshev integration\rmethod is then used to convert the singular integral equation into a system of linear equations, which are\rsolved using an appropriate iterative algorithm to calculate the contact stress under the rigid flat punch. The\rparametric analyses presented here demonstrate the effects of normalized punch length, material\rinhomogeneity, dimensionless press force, and orthotropic material type on contact stresses at interfaces,\rcritical load factor, and initial separation distance between FGM coating and orthotropic substrate. The\rdeveloped solution procedures are verified through the comparisons made to the results available in the\rliterature. The solution methodology and numerical results presented in this paper can provide some useful\rguidelines for improving the design of multibody indentation systems using FGMs and anisotropic materials.en_US
dc.identifier.doi10.31462/jseam.2021.04249266
dc.identifier.endpage266en_US
dc.identifier.issn2630-5763
dc.identifier.issue4en_US
dc.identifier.startpage249en_US
dc.identifier.trdizinid512991en_US
dc.identifier.urihttps://doi.org/10.31462/jseam.2021.04249266
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/512991
dc.identifier.urihttp://hdl.handle.net/20.500.12403/4243
dc.identifier.volume4en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.relation.ispartofJournal of Structural Engineering & Applied Mechanics (Online)en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleComputational contact mechanics for a medium consisting of functionally graded material coating and orthotropic substrateen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu