Determination of the Natural Frequency Change of Different Bayburt Stone (Tüfit) Sizes During the Transportation in the Screw Conveyor

Basit Öğe Kaydı
dc.contributor.authorErbayrak, Engin
dc.contributor.authorKırar, Burhan
dc.date.accessioned2024-10-04T19:05:18Z
dc.date.available2024-10-04T19:05:18Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThe mechanism that carries the powder or tiny granular particles with the rotational movement of the spiral shaft is called the screw conveyor. The working principle of screw conveyors is transporting dust particles due to rotating the screw shaft placed in a cylindrical pipe with engine power. The transport process transfers the powder particles to the conveyor from the feed pipe at the top of the mechanism to the wings (helix) of the helix shaft. In this study, a scaled prototype of the screw conveyor was produced. Different Bayburt stone (Tüfit) sizes were transported utilizing the prototype, and changes in the natural frequency of the screw conveyor were measured during particle transportation. The natural frequency value of the fine particles of Bayburt stone is determined as the lowest (15.67 Hz), and the natural frequency value is determined as high in the coarse particles (20.32 Hz). This is expected for this test, which is an example of forced vibration. The increase in the weight of the particles with increasing volumetric size also causes an increase in the external force values they create. The increase in mass value and the change in dynamic loads increased the natural frequency value for forced vibration. It has been observed that the natural frequency values increase in the range of 10-15 percent with the increase in particle sizes from fine to coarse. As a result, it has been determined that the size of the particles carried on the conveyor is important in determining the natural frequency of the system.en_US
dc.identifier.doi10.18185/erzifbed.1297987
dc.identifier.endpage755en_US
dc.identifier.issn1307-9085
dc.identifier.issn2149-4584
dc.identifier.issue3en_US
dc.identifier.startpage744en_US
dc.identifier.trdizinid1218533en_US
dc.identifier.urihttps://doi.org/10.18185/erzifbed.1297987
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1218533
dc.identifier.urihttp://hdl.handle.net/20.500.12403/4290
dc.identifier.volume16en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofErzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBayburt stone (Tüfit)en_US
dc.subjectScrew conveyoren_US
dc.subjectNatural frequencyen_US
dc.titleDetermination of the Natural Frequency Change of Different Bayburt Stone (Tüfit) Sizes During the Transportation in the Screw Conveyoren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu