Modeling the Effect of Pour Height, Casting Temperature and Die Preheating Temperature on the Fluidity of Different Section Thicknesses in Permanent Mold Casting of Al12Si Alloys

Basit Öğe Kaydı
dc.contributor.authorAsan, Yunus Emre
dc.contributor.authorÇolak, Murat
dc.date.accessioned2024-10-04T19:06:30Z
dc.date.available2024-10-04T19:06:30Z
dc.date.issued2022
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThe first and most important step of the casting method is that the liquid metal completely fills the mold cavity. One of the common mistakes in the casting process is that the liquid metal does not fully fill the mold cavity. For this reason, there is a need to improve the fluidity properties of aluminum alloys, the usage area of which is expanding thanks to its many advantageous properties. The aim of this study is to examine the parameters affecting the fluidity in the casting of Al12Si alloy by modeling techniques. The effects of varying pouring height, casting temperature and mold preheating temperature on fluidity in different section thicknesses were investigated in permanent mold casting. A specially designed mold with 2 mm, 4 mm, 6 mm and 8 mm section thickness was used in the study. Modeling studies were carried out with the FlowCast filling module, which is integrated into the SolidCast Casting simulation program. When the results are examined; It has been determined that all parameters play an active role on fluidity and different filling levels in different section thicknesses.en_US
dc.identifier.doi10.18185/erzifbed.1199648
dc.identifier.endpage27en_US
dc.identifier.issn1307-9085
dc.identifier.issn2149-4584
dc.identifier.issueSPECIAL ISSUE Ien_US
dc.identifier.startpage14en_US
dc.identifier.trdizinid1161340en_US
dc.identifier.urihttps://doi.org/10.18185/erzifbed.1199648
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1161340
dc.identifier.urihttp://hdl.handle.net/20.500.12403/4541
dc.identifier.volume15en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofErzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAl12Si castingen_US
dc.subjectFluidityen_US
dc.subjectFlowCasten_US
dc.subjectCasting simulationen_US
dc.titleModeling the Effect of Pour Height, Casting Temperature and Die Preheating Temperature on the Fluidity of Different Section Thicknesses in Permanent Mold Casting of Al12Si Alloysen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu