Investigation of the Effect of Solidification Time and Addition Amount of Inoculation on Microstructure and Hardness in Lamellar Graphite Cast Iron

Basit Öğe Kaydı
dc.authoridCOLAK, Murat/0000-0002-8255-5987
dc.contributor.authorColak, M.
dc.contributor.authorUslu, E.
dc.contributor.authorTeke, C.
dc.contributor.authorSafak, F.
dc.contributor.authorErol, O.
dc.contributor.authorErol, Y.
dc.contributor.authorCoban, Y.
dc.date.accessioned2024-10-04T18:51:15Z
dc.date.available2024-10-04T18:51:15Z
dc.date.issued2022
dc.departmentBayburt Üniversitesien_US
dc.description.abstractMaterial suppliers typically recommend different additive amounts and applications for foundry practices. Therefore, even in the production of the same standard materials, different results may be obtained from various production processes on different foundry floors. In this study, the liquid metal prepared with the addition of different proportions of a FeSi-based inoculation, which is most commonly used in foundries in the production of a cast iron material with EN-GJL-250 lamellar graphite cast iron, was cast into sand molds prepared with a model designed to provide different solidification times. In this way, the optimization of the inoculation amounts on the casting structure for different solidification times was investigated. In addition, hardness values were determined depending on solidification time in varying amounts of inoculation additions. SolidCast casting simulation software was used to determine the casting model geometry and solidification time. In the scope of the study, sand casting, modeling, microstructure analysis, image analysis, microstructure analysis, and hardness tests techniques were used. When the results are examined, the required amounten_US
dc.identifier.doi10.24425/afe.2022.140248
dc.identifier.endpage33en_US
dc.identifier.issn1897-3310
dc.identifier.issn2299-2944
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85149951456en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage24en_US
dc.identifier.urihttps://doi.org/10.24425/afe.2022.140248
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3440
dc.identifier.volume22en_US
dc.identifier.wosWOS:001024457400004en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolska Akad Nauk, Polish Acad Sciencesen_US
dc.relation.ispartofArchives of Foundry Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectLamellar graphite cast ironen_US
dc.subjectInoculationen_US
dc.subjectSolidification timeen_US
dc.subjectModelingen_US
dc.titleInvestigation of the Effect of Solidification Time and Addition Amount of Inoculation on Microstructure and Hardness in Lamellar Graphite Cast Ironen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu