Investigation of organic and inorganic matters removal from tannery wastewater using iron plate electrode by electrocoagulation process

Basit Öğe Kaydı
dc.authoridIrdemez, Sahset/0000-0002-0205-4630
dc.authoridKul, Sinan/0000-0002-7824-756X
dc.authoridRECBER, Zuleyha/0000-0003-2472-9077
dc.authoridEkmekyapar Torun, Fatma/0000-0002-2289-176X
dc.contributor.authorBingul, Zuleyha
dc.contributor.authorIrdemez, Sahset
dc.contributor.authorKul, Sinan
dc.contributor.authorEkmekyapar Torun, Fatma
dc.contributor.authorDemircioglu, Nuhi
dc.date.accessioned2024-10-04T18:51:13Z
dc.date.available2024-10-04T18:51:13Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractIn this study, COD, turbidity, total nitrogen, phosphate, sulphate, oil-grease and chromium removals from wastewaters taken from a local tannery using the electrocoagulation process were examined and the most suitable parameters for the electrocoagulation system were tried to be determined. Soluble iron plate electrodes were used as electrodes in the experiments. As a result of the studies carried out, the most suitable initial pH in uncontrolled pH was determined as pH = 4 and for controlled pH as pH = 5. In studies, the most suitable current density for iron electrodes was determined as 1.2 mA cm(-2). Even if the increase in current density increased the amount of dissolved Fe, it negatively affected the removal efficiency. In addition, the turbidity of the wastewater was removed in 30 minutes, phosphate in 20 minutes and chromium in 15 minutes by 100%. During 60 minutes of operation, while 62.91% of TN, 87.8% of oil-grease were removed, sulphate was removed at the rate of 54.78%. In the studies, 1st and 2nd order kinetic equations for COD removal were examined and it was determined that removal kinetic is more suitable for 2nd order kinetics.en_US
dc.identifier.doi10.1080/03067319.2021.1953002
dc.identifier.endpage6323en_US
dc.identifier.issn0306-7319
dc.identifier.issn1029-0397
dc.identifier.issue18en_US
dc.identifier.scopus2-s2.0-85110713305en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage6310en_US
dc.identifier.urihttps://doi.org/10.1080/03067319.2021.1953002
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3429
dc.identifier.volume103en_US
dc.identifier.wosWOS:000674138300001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofInternational Journal of Environmental Analytical Chemistryen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectElectrochemical treatmenten_US
dc.subjectiron electrodeen_US
dc.subjectelectrocoagulationen_US
dc.subjecttannery industryen_US
dc.subjectwastewater treatmenten_US
dc.titleInvestigation of organic and inorganic matters removal from tannery wastewater using iron plate electrode by electrocoagulation processen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu