Modeling design parameters with Taguchi experimental method for obtaining operating conditions for Cu(II) removal through adsorption process

Basit Öğe Kaydı
dc.contributor.authorSerencam, Huseyin
dc.contributor.authorOzdemir, Akin
dc.contributor.authorTeke, Cagatay
dc.contributor.authorUcurum, Metin
dc.date.accessioned2024-10-04T18:52:30Z
dc.date.available2024-10-04T18:52:30Z
dc.date.issued2019
dc.departmentBayburt Üniversitesien_US
dc.description.abstractOne of the environmental concerns deals with the removal process of pollutants in water and wastewater. In this paper, a removal process was used to eliminate pollutants in water and wastewater. The aim of this paper was to obtain an optimum adsorption condition for the highest metal ions adsorbed (MIA) mg/g. For this particular purpose, a Taguchi L-18 design was conducted. In addition, the signal-to-noise ratio was analyzed for optimum adsorption levels. The analysis of variance was also performed to evaluate the effect of each adsorption condition on MIA (mg/g) values. Moreover, an optimization model was also proposed to find the best optimal setting of adsorption levels. Then, the confirmation tests were performed using optimum coded levels of the adsorption parameters for the verification purpose. The results of the experimental study showed a good performance that Cu(II) removal capacity was found to be 43.66 mg/g. To the best of our knowledge, this research is the first to study natural stone as an efficient, inexpensive and cheap adsorbent for the removal process.en_US
dc.identifier.doi10.5004/dwt.2019.24617
dc.identifier.endpage276en_US
dc.identifier.issn1944-3994
dc.identifier.issn1944-3986
dc.identifier.scopus2-s2.0-85073450169en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage269en_US
dc.identifier.urihttps://doi.org/10.5004/dwt.2019.24617
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3497
dc.identifier.volume167en_US
dc.identifier.wosWOS:000489320600026en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDesalination Publen_US
dc.relation.ispartofDesalination and Water Treatmenten_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectModelingen_US
dc.subjectTaguchi designen_US
dc.subjectOptimizationen_US
dc.subjectAdsorptionen_US
dc.titleModeling design parameters with Taguchi experimental method for obtaining operating conditions for Cu(II) removal through adsorption processen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu