Investigation of the effect of the addition of grain refiner and modifier addition on wear properties in sand and permanent mould casting of A357 and A380 aluminium alloys

Basit Öğe Kaydı
dc.authoridCOLAK, Murat/0000-0002-8255-5987
dc.contributor.authorColak, Murat
dc.contributor.authorArslan, Ibrahim
dc.date.accessioned2024-10-04T18:51:15Z
dc.date.available2024-10-04T18:51:15Z
dc.date.issued2022
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThe aim of this study is to improve the tribological behaviour of aluminium alloys by using grain refiner and modifier. The effects of Al5Ti1B grain refiner and Al10Sr modifier additives on friction and wear properties on A380, A357 alloys produced by pouring sand andpermanent mould casting were investigated. Abrasion tests were carried out under dry conditions against St1040 steel disc using a pin-disk system with 20 N load and 1.0 m/s sliding speed. It was determined that grain refiner and modifier additives decrease the friction coefficient and increase the wear resistance. It was determined that the samples produced by permanent mould casting method decreased the friction resistance by 9% and the abrasion resistance increased by 40% compared to the samples produced in sand mould. The lowest wear rate was obtained in A380 alloy with TiB and Sr added with a value of 4.87 x 10(-11) m(2)/N.en_US
dc.identifier.doi10.1080/13640461.2022.2069912
dc.identifier.endpage23en_US
dc.identifier.issn1364-0461
dc.identifier.issn1743-1336
dc.identifier.issue1-3en_US
dc.identifier.scopus2-s2.0-85129845882en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage17en_US
dc.identifier.urihttps://doi.org/10.1080/13640461.2022.2069912
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3441
dc.identifier.volume35en_US
dc.identifier.wosWOS:000794296800001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofInternational Journal of Cast Metals Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAluminium castingen_US
dc.subjectsand castingen_US
dc.subjectpermanent mould castingen_US
dc.subjectgrain refinementen_US
dc.subjectmodificationen_US
dc.subjectwearen_US
dc.titleInvestigation of the effect of the addition of grain refiner and modifier addition on wear properties in sand and permanent mould casting of A357 and A380 aluminium alloysen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu