Performance Analysis of Buck-Boost and SEPIC Converter for Commutation Torque Ripple Minimization in BLDC Motors

Basit Öğe Kaydı
dc.authoridCORAPSIZ, Muhammed Resit/0000-0001-5477-5299
dc.contributor.authorCorapsiz, Muhammed Resit
dc.contributor.authorKahveci, Hakan
dc.date.accessioned2024-10-04T18:52:37Z
dc.date.available2024-10-04T18:52:37Z
dc.date.issued2022
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThis paper discusses comparative analysis of Buck-Boost and SEPIC (Single Ended Primary Inductance) converters used in DC link voltage control technique to reduce torque ripple in Brushless Direct Current Motors (BLDCM). The aim of this study is to prove the efficiency of the aforementioned two converters, which have been adopted in many studies to reduce torque ripples caused by commutation, on the same motor parameters. Although BLDCM has many advantages, ripples in the generated torque have limited the use of these motors in applications requiring precise speed and torque. In this study, BLDCM was analyzed exhaustive mathematically and electrically and the problem that caused commutation torque ripples was explained in detail. The DC link voltage control has been proposed to suppressing torque ripples in the BLDCM. In addition, the link voltages required for reducing the torque ripples were obtained separately via both the Buck-Boost and the SEPIC converters. These converter topologies are examined under certain speed and torque conditions and the results were compared. When the results are evaluated together, it was observed that both converters performed the very closely performance each other. However, the Buck-Boost converter produced the desired voltage levels with less oscillation than the SEPIC converter.en_US
dc.identifier.doi10.1080/15325008.2022.2049653
dc.identifier.endpage1067en_US
dc.identifier.issn1532-5008
dc.identifier.issn1532-5016
dc.identifier.issue11-12en_US
dc.identifier.scopus2-s2.0-85128644892en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage1052en_US
dc.identifier.urihttps://doi.org/10.1080/15325008.2022.2049653
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3583
dc.identifier.volume49en_US
dc.identifier.wosWOS:000779259900001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofElectric Power Components and Systemsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectbrushless DC motoren_US
dc.subjectcommutation torque ripplesen_US
dc.subjectbuck-boost converteren_US
dc.subjectsepic converteren_US
dc.subjectDC-link voltage controlen_US
dc.titlePerformance Analysis of Buck-Boost and SEPIC Converter for Commutation Torque Ripple Minimization in BLDC Motorsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu