MODELLING AND VALIDATION OF EFFECT OF BINDER TYPE ON FEEDING BEHAVIOUR OF SPHEROIDAL GRAPHITE CAST IRON

Basit Öğe Kaydı
dc.authoridCOLAK, Murat/0000-0002-8255-5987
dc.contributor.authorColak, Murat
dc.contributor.authorSekerden, Mete
dc.date.accessioned2024-10-04T18:52:30Z
dc.date.available2024-10-04T18:52:30Z
dc.date.issued2022
dc.departmentBayburt Üniversitesien_US
dc.description.abstractIn the casting method, it is crucial to properly make the moulding design to produce sound parts. Volumetric change, especially during the solidification of spheroidal graphite cast irons, may show different behaviour compared to steel and aluminium castings. In this study, castings were carried out with single and double feeders with varying casting parameters of green sand and resin mould sand containing different cross-sectional thicknesses. Depending on the chemical composition, mould rigidity and inoculation efficiency, and the importance of the feeder path was evaluated by experimental and modelling techniques. Consequently, it was observed that the risk of shrinkage in resin moulds is less than in green sand castings in the same moulding design. In addition, it has been found that the number of feeders and neck connection is an important parameter in pore formation.en_US
dc.identifier.doi10.1080/13640461.2022.2064653
dc.identifier.endpage16en_US
dc.identifier.issn1364-0461
dc.identifier.issn1743-1336
dc.identifier.issue1-3en_US
dc.identifier.scopus2-s2.0-85129335025en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage9en_US
dc.identifier.urihttps://doi.org/10.1080/13640461.2022.2064653
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3499
dc.identifier.volume35en_US
dc.identifier.wosWOS:000783410400001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofInternational Journal of Cast Metals Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSpheroidal graphite cast ironen_US
dc.subjectbinderen_US
dc.subjectfeeder necken_US
dc.subjectmodellingen_US
dc.subjectshrinkageen_US
dc.titleMODELLING AND VALIDATION OF EFFECT OF BINDER TYPE ON FEEDING BEHAVIOUR OF SPHEROIDAL GRAPHITE CAST IRONen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu