Optimal Material Selection for Total Hip Implant: A Finite Element Case Study

Basit Öğe Kaydı
dc.authoridKaymaz, Irfan/0000-0002-9391-7218
dc.authoridSENSOY, Abdullah/0000-0002-9371-8307
dc.contributor.authorSensoy, Abdullah Tahir
dc.contributor.authorColak, Murat
dc.contributor.authorKaymaz, Irfan
dc.contributor.authorFindik, Fehim
dc.date.accessioned2024-10-04T18:52:32Z
dc.date.available2024-10-04T18:52:32Z
dc.date.issued2019
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThe selection of most proper materials in engineering design is known as an important stage of the design process. In order to successfully complete this stage, it is necessary to have sufficient knowledge about the structure of materials, density, melting point, thermal expansion coefficient, tensile and yield strength, elongation, modulus of elasticity, hardness and many other properties. There are several selection systems that help the design engineer to choose most suitable material that meet the required properties. In the field of bioengineering, the selection of materials and the development of new materials for the clinical needs are increasingly important. In this study, the cases of optimal implant stabilization were investigated, material alternatives for hip prosthesis were evaluated, and optimal materials were determined. Using computerized tomography data with MIMICS software, virtual surgery was applied the hip bone and the implant was attached to bone. Boundary conditions and material properties have been defined, and finite element model has been created. FEA investigation of the mechanical behavior of the hip implant for various material alternatives determined by the CES software showed that the best material candidate is austenitic, annealed and biodurable stainless steel in terms of the micromotions at the implant-bone cement interface regarding osseointegration. This candidate showed 20.69% less strain value than the most commercially used hip implant material, Ti6Al4V. Therefore, the findings of this study suggest that the use of some specific stainless steel materials for implants may reduce the operation cost and increase the operation success for the total hip arthroplasty.en_US
dc.identifier.doi10.1007/s13369-019-04088-y
dc.identifier.endpage10301en_US
dc.identifier.issn2193-567X
dc.identifier.issn2191-4281
dc.identifier.issue12en_US
dc.identifier.scopus2-s2.0-85070221569en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage10293en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-019-04088-y
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3540
dc.identifier.volume44en_US
dc.identifier.wosWOS:000497394300039en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHip prosthesisen_US
dc.subjectOptimal materialen_US
dc.subjectSelectionen_US
dc.subjectCESen_US
dc.subjectFinite element analysisen_US
dc.subjectImplanten_US
dc.titleOptimal Material Selection for Total Hip Implant: A Finite Element Case Studyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu