Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures

Basit Öğe Kaydı
dc.contributor.authorErbayrak, Engin
dc.contributor.authorGumus, Beril Eker
dc.contributor.authorYuncuoglu, Ercument Ugur
dc.date.accessioned2024-10-04T18:50:59Z
dc.date.available2024-10-04T18:50:59Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractAn experimental study of the single-lap joints at different loading rates and ambient temperatures was investigated. In the experiment, a single lap joint was formed using plain woven glass fiber reinforced epoxy (GFRE) laminates, plain woven aramid fiber reinforced laminates (AFRE), and Araldite 138 M / HV998 epoxy adhesive. The composite laminates were produced using Vacuum-Assisted Resin Transfer Molding (VARTM) process. Adhesively bonded joints were created using similar and dissimilar adherends. Experiments were carried out under different loading rates (1 mm/min, 10 mm/min, 50 mm/min, 100 mm/min) and ambient temperatures (23 degrees C,60 degrees C,100 degrees C). Stress-strain graphs were obtained for each experimental condition. It is seen that the maximum stress values increase as the loading rate increases in all single lap joints at all different temperatures. However, in all single lap joints, at all different loading rates, the maximum stress value decreases as the ambient temperature increases.en_US
dc.identifier.doi10.1007/s40430-023-04195-w
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85153190557en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40430-023-04195-w
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3307
dc.identifier.volume45en_US
dc.identifier.wosWOS:000971018200001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofJournal of the Brazilian Society of Mechanical Sciences and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectComposite laminateen_US
dc.subjectSingle lap jointen_US
dc.subjectLoading ratesen_US
dc.subjectAmbient temperaturesen_US
dc.titleExperimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperaturesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu