Thermal, rheological, and mechanical characterization of compression and injection molded ultra-high molecular weight polyethylene, high density polyethylene, and their blends

Basit Öğe Kaydı
dc.authoridYilmaz, Galip/0000-0001-8128-3193
dc.authoridYang, Huaguang/0000-0001-9495-1402
dc.authoridTurng, Lih-Sheng/0000-0001-8022-9224
dc.contributor.authorYang, Huaguang
dc.contributor.authorYilmaz, Galip
dc.contributor.authorJiang, Jing
dc.contributor.authorLangstraat, Thomas
dc.contributor.authorChu, Raymond
dc.contributor.authorvan Es, Martin
dc.contributor.authorGarg, Priya
dc.date.accessioned2024-10-04T18:54:03Z
dc.date.available2024-10-04T18:54:03Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractTensile and impact test samples of ultra-high molecular weight polyethylene (UHMWPE), high-density polyethylene (HDPE), and their blends at various UHMWPE/HDPE weight ratios were prepared via compression molding and injection molding for thermal, rheological, and mechanical characterization. A twin-screw extruder with either a tapered die with air-cooling or a regular die was used to compound and extrude the materials prior to pelletization and molding. To the best of our knowledge, there has been no publication on pelletizing neat UHMWPE using a regular extruder. The differential scanning calorimetry analysis suggested the occurrence of re-crystallization and co-crystallization for all the blends. The rheology test confirmed that all the blends exhibited a solid-like behavior and the degree of compatibility increased with increasing HDPE content in the blends. A strong synergistic effect was observed the blends possessed a higher tensile and impact strength than their neat UHMWPE and HDPE counterparts. The compression molded (95/5) UHMWPE/HDPE samples extruded using the tapered die yielded the highest tensile strength (50.1 MPa), which was about 40% higher than that of the neat UHMWPE samples. The best composition of these blends for compression and injection molded parts is 10% HD and 50% HD, respectively.en_US
dc.description.sponsorshipConsolidated Papers Foundation Professorship; Saudi Basic Industries Corporation; Kuo K. and Cindy F. Wang Professorship; Wisconsin Institute for Discoveryen_US
dc.description.sponsorshipConsolidated Papers Foundation Professorship; Saudi Basic Industries Corporation; Kuo K. and Cindy F. Wang Professorship; Wisconsin Institute for Discoveryen_US
dc.identifier.doi10.1002/app.53484
dc.identifier.issn0021-8995
dc.identifier.issn1097-4628
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-85143383730en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1002/app.53484
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3843
dc.identifier.volume140en_US
dc.identifier.wosWOS:000919369900001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofJournal of Applied Polymer Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectHDPEen_US
dc.subjectpelletizationen_US
dc.subjectsynergistic effecten_US
dc.subjecttapered dieen_US
dc.subjectUHMWPEen_US
dc.titleThermal, rheological, and mechanical characterization of compression and injection molded ultra-high molecular weight polyethylene, high density polyethylene, and their blendsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu