Correlation Between K-value, Density Index and Bifilm Index in Determination of Liquid Al Cleanliness

Basit Öğe Kaydı
dc.authoridDispinar, Derya/0000-0001-9550-6933
dc.authoridTigli, Ahmet/0000-0001-7605-4222
dc.contributor.authorTigli, A.
dc.contributor.authorTokatli, M.
dc.contributor.authorUslu, E.
dc.contributor.authorColak, M.
dc.contributor.authorDispinar, D.
dc.date.accessioned2024-10-04T18:49:25Z
dc.date.available2024-10-04T18:49:25Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractAluminum alloys are widely used in the industry thanks to its many advantages such as light weight and high strength. The use of this material in the market is increasing day by day with the developing technology. Due to the high energy inputs in the primary production, the use of secondary ingots by recycling from scrap material are more advantageous. However, the liquid metal quality is quite important in the use of secondary aluminum. It is believed that the quality of recycled aluminum is low, for this purpose, many liquid metal cleaning methods and test methods are used in the industry to assess the melt cleanliness level. In this study, it is aimed to examine the liquid metal quality in castings with varying temperature using K mold. A206 alloy was used, and the test parameters were selected as: (i) at 725 & DEG;C, 750 & DEG;C and 775 & DEG;C casting temperatures, (ii) different hydrogen levels. The hydrogen level was adjusted as low, medium and high with degassing, as-cast, and upgassing of the melt, respectively. The liquid metal quality of the cast samples was examined by the K mold technique. When the results were examined, it was determined that metal K values and the number of inclusions were high at the as-cast and up-gas liquid with increasing casting temperatures. It has been understood that the K mold technique is a practical method for the determination of liquid metal quality, if there is no reduced pressure test machine available at the foundry floor.en_US
dc.identifier.doi10.24425/afe.2023.144311
dc.identifier.endpage29en_US
dc.identifier.issn1897-3310
dc.identifier.issn2299-2944
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85175448766en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage22en_US
dc.identifier.urihttps://doi.org/10.24425/afe.2023.144311
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3120
dc.identifier.volume23en_US
dc.identifier.wosWOS:001044254400001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolska Akad Nauk, Polish Acad Sciencesen_US
dc.relation.ispartofArchives of Foundry Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectA206 aluminum castingen_US
dc.subjectK molden_US
dc.subjectLiquid metal cleaningen_US
dc.subjectRPTen_US
dc.subjectSecondary aluminumen_US
dc.titleCorrelation Between K-value, Density Index and Bifilm Index in Determination of Liquid Al Cleanlinessen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu