Cr-substituted nanocrystalline Ni-Co ferrites: tuning dielectric, magnetic, structural, X-band microwave absorption, and characteristic properties

Basit Öğe Kaydı
dc.authoridTEBER, AHMET/0000-0002-7361-2302
dc.authoridSarac, Mehmet Fahri/0000-0002-0760-5569
dc.contributor.authorTeber, Ahmet
dc.contributor.authorSarac, Mehmet F.
dc.date.accessioned2024-10-04T18:49:25Z
dc.date.available2024-10-04T18:49:25Z
dc.date.issued2023
dc.departmentBayburt Üniversitesien_US
dc.description.abstractThe structural, characteristic, dielectric, and magnetic features of Co0.5Ni0.5CrxFe2 - xO4 (0.0 <= x <= 1.0 with a step of 0.2 x-concentration) nanoparticles are prepared via the hydrothermal method. The investigation of characteristics, structural, and magnetic features of the produced nanoparticles are examined through XRD, FT-IR, SEM-EDS, TEM-SAED, and VSM, respectively. AC conductivity and the dielectric investigations are also reported. According to the XRD measurements, all samples have the M-type hexagonal crystal structure nanocrystallites of between 27 and 97 nm. Refined structural parameters using Rietveld analysis are carried out using the TOPAS refinement program. A good match was observed between the diffraction patterns obtained and calculated by Rietveld analysis. Moreover, the morphological analyses indicate that the relatively small spherical structures of Ni-Co ferrites particles can be seen to change from spherical to relatively oval-shaped with increasing chromium content. The results of the FT-IR study show that the spinel structure has formed as predicted because the expected range of absorption bands is present. According to magnetic measurements, Cr-substituted Ni-Co ferrite nanostructures reveal a relatively soft ferromagnetic property. The coercive field (H-c) variation has a propensity to decrease in relation to the Cr-concentration. The electromagnetic constitutive parameters are calculated from measured S-parameters (S-11 and S-21) using network analyzer and the return losses of the samples are then obtained to determine microwave absorption properties. According to the dielectric and magnetic tangent losses or dissipation factors, both dielectric and magnetic features can mutually reinforce in terms of microwave absorption properties in the X-band. The Cr2O3 impurity peaks obtained by XRD analysis have an effect on the microwave absorption properties. The results of the microwave absorption based on each concentration reveal that there exist electromagnetic wave absorptions between approximately 11 GHz and 12.4 GHz in the X-band. The absorption trend is also towards the Ku-band.en_US
dc.identifier.doi10.1007/s10854-022-09793-3
dc.identifier.issn0957-4522
dc.identifier.issn1573-482X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85146911047en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s10854-022-09793-3
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3125
dc.identifier.volume34en_US
dc.identifier.wosWOS:001032314100054en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Science-Materials in Electronicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectElectrical-Propertiesen_US
dc.subjectCation Distributionen_US
dc.subjectAlloysen_US
dc.titleCr-substituted nanocrystalline Ni-Co ferrites: tuning dielectric, magnetic, structural, X-band microwave absorption, and characteristic propertiesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu