Evaluating the grinding process of granitic rocks using the physico-mechanical and mineralogical properties

Basit Öğe Kaydı
dc.authoridYogurtcuoglu, Emine/0000-0002-9961-8809
dc.contributor.authorKahraman, Sair
dc.contributor.authorUcurum, Metin
dc.contributor.authorYogurtcuoglu, Emine
dc.contributor.authorFener, Mustafa
dc.date.accessioned2024-10-04T18:49:45Z
dc.date.available2024-10-04T18:49:45Z
dc.date.issued2019
dc.departmentBayburt Üniversitesien_US
dc.description.abstractGranitic rocks are sometimes ground for different purposes. Predicting the mean particle size (d(50)) is useful for planning and cost estimation of purposes. In order to investigate the possibility of predicting the d(50) of ground rock from the physico-mechanical rock properties, six different granites were tested in the laboratory. First, the d(50) values were correlated with the corresponding physico-mechanical properties. The simple regression analysis showed that there were no good correlations between the d(50) and the physico-mechanical properties. Then, the multiple regression analysis was carried out and strong prediction equations were developed. It was also shown that the dominant parameter in grinding was the abrasive mineral content of rock. It is concluded that the d50 of granites can be predicted from the derived multiple regression equations especially for preliminary investigations. The developed estimation equations including index test values are especially useful since they are easy to use.en_US
dc.description.sponsorshipScientific Research Project Unit of Omer Halisdemir University [FEB 2008/10]en_US
dc.description.sponsorshipThis study has been supported by the Scientific Research Project Unit of Omer Halisdemir University, under project number FEB 2008/10.en_US
dc.identifier.doi10.14456/jmmm.2019.18
dc.identifier.endpage57en_US
dc.identifier.issn0857-6149
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85068968312en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage51en_US
dc.identifier.urihttps://doi.org/10.14456/jmmm.2019.18
dc.identifier.urihttp://hdl.handle.net/20.500.12403/3273
dc.identifier.volume29en_US
dc.identifier.wosWOS:000473312800006en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherChulalongkorn Univ, Metallurgy & Materials Science Research Insten_US
dc.relation.ispartofJournal of Metals Materials and Mineralsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectGrindingen_US
dc.subjectMean particle sizeen_US
dc.subjectGranitesen_US
dc.subjectPhysico-mechanical propertiesen_US
dc.subjectAbrasive mineral contenten_US
dc.titleEvaluating the grinding process of granitic rocks using the physico-mechanical and mineralogical propertiesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu